Videosecu Projector Ceiling Bracket Pj2w (Office Electronics) 2086

Review for lcddlp projector ceiling mount

Price was $16.99. We bought this with optoma hd20 projector and it works flawless. Mount has full range of motion everywhere. Left-right, up-down, diagonal. Everywhere. Because our ceiling is not flat (spanish wall) mount had to be installed in a crooked position but it was a 5 minute job to adjust it perfectly. You get plenty of extra parts in the box and you will not use all of them. Optoma hd20 has 3 holes and this mount comes with 4 arms. I posted pictures how we did this. If your projector also has 3 holes this may help you a little bit. Check pictures in the item pictures on top. Something to pay attention to: all screws are in metric measurements. I found out this the hard way. I used power drill to screw it to the ceiling and i damaged the head of a philips screw that came with the mount. When i went to lowes to find the allen socket wrench for it they didn't have it because of metric measurements. This is easily avoidable though, just use regular screw driver to mount this thing and don't use the power drill. All in all 5 stars.

-. Anonymous

Lcd/dlp projector ceiling mount bracket white fits flat vaulted ceiling this mount is videosecu brand. mount features a flexible mounting system that can be used most projector model, and it has the versatility to attach to nearly any ceiling. the mounting -videosecu lcd/dlp projector ceiling mount bracket white fits flat vaulted ceiling pj2w 1ca

  • Included: Without Extension Pole, The Height Is 5. 9″; With Extension Pole, Height Adjust From 18. 1″ To 26. 7″ (45. 9-67. 8 Cm); Ceiling Plate Adjustable 0 To 90 Degree Swivel.
  • Included: Heavy Duty Steel Construction, Maximum Loading 44 Lbs (20 Kgs); Rotate Adjustment Left And Right 5 Degrees.

OnSale Videosecu Projector Ceiling Bracket Pj2w (Office Electronics) Pj2w

Buy Now


Foreword : Videosecu

The mount was too long, so i cut both of the down tubes 5". So now my projector sits 13" below my ceiling, which negates keystoning with my projector. I bought an epson 2030 with this mount, and it holds it securely. A little finicky with adjusting, but all good. It is a little brainstorming on how to position the mount arms to correspond to your projector holes. At least it was to me, with the epson. But in all, this mount holds my projector securely, looks nice and professional. #Videosecu Monitor Extension Articulating The Best lcddlp projector ceiling mount ( Sep 2019 ) | Videosecu-Office Electronics Review Included VideoSecu LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA Mounting arms removable and extendable, 3" extra extension adaptor included. Without extension pole, the height is 5. 9"; with extension pole, height adjust from 18. 1" to 26. 7" (45. 9-67. 8 cm); ceiling plate adjustable 0 to 90 degree swivel. Heavy duty steel construction, maximum loading 44 lbs (20 kgs); rotate adjustment left and right 5 degrees. Integrated cable management; exclusive "no-slip" adjustment system; lock in any position; easily release and lock. Standard size hardware, comprehensive installation manual included. videosecu brand. please report to if you recieve a mount without videosecu logo .

Videosecu Lcd/dlp Projector Ceiling Mount Bracket White Fits Both Flat Or Vaulted Ceiling Pj2w 1ca Review (pj2w)

I'm using this with an nec vt700 (which means it will work with every other nec to my knowledge). As others have mentioned, this is a remarkably strong projector mount. It comes with great instructions and all the hardware you need (plus extras of every piece! ). I have been working in it for a long time and have seen all varieties of projector mounts (mostly for much more money), and i have to say this is the best i've used thus far. The degree of adjustability is incredible, and you can fine tune it almost any way you want. There have been some complaints here about the instructions, which i believe are totally unfounded. I thought they were concise, but more than clear enough to understand and use effectively. I will be using and recommending this mount from here on out! -Q. Rowe

Videosecu Projector Ceiling Bracket Pj2w

  • Order: Office Product
  • Comparable: Videosecu Articulating Bracket Plasma
  • Brand: VideoSecu
  • EAN: 0811535010972
  • Manufacturer: VideoSecu
  • Model: PJ2W
  • MPN: PJ2W
  • Quantity: 1
  • Part/Serial Number: PJ2W
  • Sub-Type: Office Product
  • Category: OFFICE ELECTRONICS
  • UPC: 811535010972

lcd/dlp projector ceiling mount bracket white fits flat vaulted ceiling Office Product, This mount is videosecu brand. mount features a flexible mounting system that can be used with most projector model, and it has the versatility to attach to nearly any ceiling. the mounting interface features four double-jointed support arms that allow flexible positioning to reach almost any mounting point of the projector. each arm can be precisely positioned to avoid covering important projector ventilation and access points used for lamp and air filter replacement. this minimizes heat build-up and maximizes lamp life. its robust construction allows the mount to positively hold the projector fixed at nearly any angle. this mount's tilt and roll can be adjusted independently of one another, compared to the clumsier adjustments needed for ball-and-socket mounts. it comes with an adjustable channel and ceiling plate. this allows the projector to be mounted at an adjustable height from the ceiling. this auction is for 1 set of white projector ceiling mount. does this mount fit my projector? please look at the mounting screws on the top of your projector. measure the distance between the holes. if your projector has 3 holes pattern or 4 hole pattern, and the maxim distance between any two holes(especially diagonally) is less than 12. 5 inch/32 cm, then this mount will fit your projector. if your projector has holes more than 12. 5" apart, you need 5" extender (sold separately in our online store store : b0036849j6) which can cover an area up to 17 inch in diameter Videosecu Projector Ceiling Bracket Pj2w (PJ2W-Videosecu).

Videosecu Projector Ceiling Bracket Pj2w Office Product

PROS
  • Installation can be a bit of a challenge like others pointed out, but it's worth the effort. I installed it for my optoma hd26 and it played well with it. Please see the pictures attached to find out 1. How to connect the projector to the mount (you will have to remove one of the prongs from the mount as hd26 only has 3). 2. The screws you need to attach the hd26 to the mount (the ones that came with the mount are not long enough).
  • The descriptor for this and the pictures show the ability to align this to a 3 arm configuration. This is not the case as the mounting plate only has 4 holes in it, not 5. This seems well built with that exception, but since it is advertised as having 3 arms or 4 this is a major design flaw and i must review it as one star for being totally worthless to my installation. . Update: after receiving a replacement for this it turns out that this should indeed have 5 holes in the mounting bracket to allow for a 3 hole projector mount. I have adjusted this to 4 stars as it really does a good job, but left out a star for poor quality control. Missing drilling and tapping a hole is a big miss in my opinion.
  • Videosecu Tilting 800x400mm Capacity
CONS
  • Okay so it worked. But it took a long time to figure out how to make the mount work for my acer h6510bd projector. I never have problems with directions, half the time i don't even need them but this was ridiculous. In one part it told me to remove an arm and move it to position b for a three arm setup. There was no position b, no hole. I ended up getting this to work by turning around one arm. Honestly i gave it 3 stars because it did work. It has a lot of useful adjustments but if i had gotten a projector specific mount i would of had this thing up a day earlier. I did not use the extension arm but it looks "unsafe" to me.
  • Took some noodling to get the mount "legs" set up right for my projector (acer h6510bd) they state the center of gravity of the projector should be at the down rod. This ment cleverly flipping some of the leg feet and then installing the bracketry. The assembly is confusing because the amount of parts they give you and only refer to things as m-l or m-n which means going back and referencing the first page and back and forth again and again. They don't nessisarly state the bushings need to be on both sides of certain parts but it can somewhat be infered by the diagram which isn't drawn to scale. Word of warning as well the plate that goes on the wall/ceiling they imply is mounted the same direction of the joists in a joisted ceiling which is ok if your screen is down joist but otherwise you'll end up with a projector facing the side wall if you follow the rest of the instructions. So bottom line is i'd advise mocking everything up first before doing anything permanent. . My next gripe is the amount if adjustment makes it such that even if everything is tight plugging in a cable or something can knock the projector out of alignment. . Last gripe is apparently my projector fan isn't perfectly ballanced and this mount does a good job of using the cealing as a speaker which wasn't a problem before. . Past that it seems like a good mount and was reasonably priced
  • The only reason i'm giving it "2" stars is that it appears to be somewhat solidly built "if" you figure out how to get it assembled! . Forget the printed misleading instructions. I ended up "macgyvering" my way through the assembly. The included instructions are no less than maddening! add to that i was missing a couple of key bolts and plastic washers. To the garage i went to dig through my spare nuts and bolts bin. Unfortunately, the one i had wasn't quite the right diameter so i had to drill one of the holes a little larger to finish the assembly. The manufacturer needs to revisit the assembly instructions and work on their qc department to make sure all of the parts are there before shipping. Yes, i could have shipped it back. Yes, i could have requested the missing parts, yes, you get what you pay for. However, my time is money and my weekends are full of projects so i just worked my way through it and moved on. I do like the amount of adjustments available on this unit. I just hope they hold securely as some reviews state it moves around a lot even after tightening things up. I am waiting on my projector and will adjust this review accordingly depending on the outcome and fit.

lcddlp projector ceiling mount VideoSecu LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA (Switch to Mobile/Desktop Version)

Thanks to pics uploaded by another reviewer i was able to get this mount to work. There are 4 legs on the mount but only 3 pre-drilled holes on the hd20. You have to remove one of the 4 legs (the sliding portion of the leg anyway) by simply unloosening an allen head screw. Another sliding leg also has to be removed and placed in backward facing to match up with the third hole on the hd20. The pics didn't specifically address that, it kind of looks like there are only two of the mounts legs attached. I ended up using the extension rod. It was kind of a pain as you have to balance a metal cylinder inside the extension shaft while screwing into it from the outside. I didn't use the extender's cable management as it would require for dis-assembly to change out cables if one goes bad. . This mount requires a lot of assembly and dis-assembly if you want to do it right. Definitely read the manual and separate the parts before you begin as there are about 20 washers that are different but look the same. This was my first projector. My advice is to do a complete moc up of the projector placement (to include firing up the projector with a test image on the wall) before tightening the allen head screws and drilling into the ceiling (thank the lord i had some left over spackle). I had my son help me out so i held the mount up to the ceiling and he held the projector. . You have to decide first off if you are going to use the extender, as it will modify the install greatly. Attach the projector to the mount's feet as per the other user's review pics and above description. . The ceiling bracket has 3 holes and three screws. The screws have a socket head with a phillips head screw pattern also. My advice is to use a 8mm socket and electric drill not a screw driver, as i easily stripped out the phillips portion driving in the first screw. The ceiling bracket has a center hole that will allow you to put in the screw first then place the mount on and slide it over (to lock it into place). You can then install the other 2 screws. Not sure why, as you have to install the mount by itself as you cant tighten the screws with the bottom portion attached. Also the screws say they are 10mm. I didn't have 10mm drill bits, so i approximated and it made the drilling a bit rough. . Once you have the ceiling bracket installed, then you can slide the bottom portion (with projector attached) onto two pins before screwing it in tightly. This is a major plus if you don't have a helper to hold the projector while tightening everything with the provided allen wrenches. You will need another set of allens or at least the bigger one of the two that come included if you use the extension to tighten them. . Over all, it took me about 1. 5 hours from start to finish. Hope review helps.

Videosecu Lcd/dlp Projector Ceiling Mount Bracket White Fits Flat Vaulted Ceiling Pj2w 1ca
Click to see NoticeVideosecu Projector Ceiling Bracket Pj2w (Office Electronics)"Pretty tough to get it all together to hold my optoma gt1080, but was able to sort it out. Instructions weren't great, but again. I got the job done. Chief complaint is that it's all a little wobbly, and it's extremely difficult to make the small adjustments needed to get my projector lined up perfectly and, once done, it needs to be re-adjusted every few days or so (which is extremely difficult)."

(0) Question: W1070


(1) Question: Does this work with an lg ph300 mini projector


(2) Question: Is it easy to disconnect a projector from this mount, if i was to have a backyard movie night for example?



Featured Categories » Gold Merchants » Specialty Boutique » Videosecu Projector Ceiling Bracket Pj2w (Office Electronics) Pj2w


Optoma EH200ST Full 3D 1080p 3000 Lumen DLP Short Throw Projector 20,000:1 Contrast Ratio MHL Enabled HDMI Port

The optoma eh200st brings all-digital short throw high definition projection to conference rooms, training rooms, classrooms and houses of worship. Its sharp 0. 5:1 short throw projection lens delivers large, bright, crystal clear 1080p resolution graphics, presentations and movies ranging in size from 40" to 300" diagonal. Whether your application calls for wall mounted installation or desktop projection, the optoma eh200st will captivate your audience with its 3000 lumens bright image, vibrant, true-to-life colors and 20, 000:1 contrast ratio. Equipped with the level of connectivity you need for today's digital world, the optoma eh200st offers two hdmi ports, mhl connectivity, vesa 3d sync port, audio out, 12v output, powerful 10-watt audio, whisper quiet operation and more. The eh200st features optoma's latest eco+ technology for ultra long lamp life and low cost of operation.

Optoma EH200ST Full 3D 1080p 3000 Lumen DLP Short Throw Projector 20,000:1 Contrast Ratio MHL Enabled HDMI PortOptoma-EH200ST-1080p-Lumen-Projector

OPTOMA EH200ST FULL 3D 1080P 3000 LUMEN DLP SHORT THROW PROJECTOR 20,000:1 CONTRAST RATIO MHL ENABLED HDMI PORT Review
Brand :    optoma
Weight :    5.84 pounds
Model :    EH200ST
Quantity :    1
Order click here :    normally ships in 1-2 business days
Ce :    Best Office Electronics (optoma product review) for Optoma EH200ST Full 3D 1080p 3000 Lumen DLP Short Throw Projector 20,000:1 Contrast Ratio MHL Enabled HDMI Port available ( Sep 2019 )
Price :    $750.00 (was $852.22)
  • Project a 100" diagonal image only 3. 5-feet from the screen
  • Mhl enabled hdmi port, present directly from your mobile phone or tablet
  • All digital connectivity for lowest latency and faster response time
  • 20, 000:1 contrast ratio adds visual impact to presentations, and vesa 3d sync port
  • Vesa 3d sync port, computer compatibility:uxga, sxga, wxga, hd, xga, svga, vga, mac

Epson Home Cinema 2040 1080p 3D 3LCD Home Theater Projector

The color and clarity is beautiful. I expected nothing less from an epson. First time projector buyer and i couldn't be happier. I thought and expected that i would need total darkness for a picture that i would enjoy and it's just not the case. I am able to have a floor lamp on and the quality of the image still looks amazing. I use this as my main monitor for my macbook pro for video editing. No more looking at a small screen for my countless hours of editing. :)

The home cinema 2040 projector brings the big screen home, delivering full hd 1080p entertainment. Offering up to 3x higher color brightness1 than competitive models, epson 3lcd projectors ensure vibrant images. This portable performer delivers up to 35, 000:1 dynamic contrast ratio, advanced image processing, plus 2200 lumens of color brightness and 2200 lumens of white brightness2. Enjoy movies, games and more with two hdmi ports and mhl3 connectivity. Connect your blu-ray disc player, gaming console or streaming device, and project up to 300" virtually anywhere. A built-in speaker and convenient setup tools mean you can enjoy hd content out of the box.

Epson Home Cinema 2040 1080p 3D 3LCD Home Theater ProjectorEpson-Cinema-1080p-Theater-Projector

Epson Home Cinema 2040 1080p 3d 3lcd Home Theater Projector (v11h707020) FAQ.

Bang for your buck, this projector is awesome. I paid $499 for this lcd, 1080p, 3d project to replace a 720p projector i paid 8x as much for 10 years ago. Blu-ray, video games, live tv all look great. The only problem isn't an issue with the projector, but with streaming services such as netflix or hbo go. Their compression doesn't stand up to the picture quality the projector puts out, often looking grainy at 110 inches. -Notice from M. Theola, Mississippi

Click to Show epson home cinema 2040 1080p 3d 3lcd home theater projector (v11h707020) Details

A decent upgrade from my acer 720p projector. The contrast is exceptional even with auto iris disabled. The iris action is kind of annoying and honestly it doesn't make enough of a difference to be left on. Decently quiet unit and the image quality is great. There is a manual horizontal and automatic vertical adjustment (my acer only had vertical) which made placement significantly easier. Motion interpolation works well but has hiccups on 24 fps content.

Epson-home-cinema-2040-1080p-3d-3lcd-home-theater-projector-(v11h707020) set picture

- K. RubySuper high quality, easy installation. Right out of the box it is ready to use. Super bright, perfect for movies, sports and games. 101%

I had the opportunity to test out both the epson home cinema 2040 and 1040 recently, and here are my thoughts comparing the two. . Both have a msrp (usd) of $799 (with a varying street price not too far from one another), both are considered home cinema projectors by epson, and both have hd resolution. Out of those three statements, however, i disagree with the second. . Both are home cinema projectors? . . I have managed, tested and installed both home cinema and multimedia projectors. In general, multimedia projectors tend to be used in conference rooms at business for giving presentations, whereas home theater or cinema projectors are for watching movies and playing video games. There is some gray area as to what makes one a multimedia and another a home cinema, but a few factors lean toward a specific type. Technically, you can use either for both purposes, but it s best to aim for the areas that best fit your needs. . In my estimation, the epson 2040 fits best in the home cinema category whereas the epson 1040 fits better as a multimedia. Why? well, for one thing take a look at the remotes. The 1040 s remote displays buttons for mouse clicking and moving pageup and pagedown; a feature commonly used for advancing powerpoints. It also prioritizes the source selection for computer, which is typically used in a conference room. The 2040 on the other hand does not have mouse centered controls and it prioritizes hdmi (typically used in home theaters) as the source selections. On top of that, there are play and pause buttons on the 2040 s remote - not so on the 1040. . If the controller wasn t enough, take a look at the throw distance. Throw distance basically means the size a projected image will be based on the projector s distance from the wall or screen. Most central conference rooms offer more space than living rooms. So, if you want to see tom brady nail that touchdown to rob gronkowski at maximum size, or headshot that noob in call of duty with a large zoom, you ll want a throw distance that allows for a bigger picture at a closer distance. . Using my home theater setup as an example, my room only allows 10 feet of distance between projector and wall/screen. At 10 feet, the epson 1040 projects a 79" wide image on the screen. Whereas the epson 2040 projects a 90 wide image. That means the epson 2040 provides a bigger image than the 1040 at a shorter distance, thus is more living room (or even bedroom) friendly. . Now, what about movies? let s say you have the avengers on blu-ray and want to watch it in 3d. Again, here s where the epson 2040 proves to be more cinematic; it has 3d capability whereas the 1040 does not. You ll need to purchase 3d glasses separately (epson lists (rf) elpgs03 as the official option) - they are a bit pricy and need to be charged/powered - but they allow you to view 3d movies on the 2040 should you wish to. Not so on the 1040. . There is a slight brightness difference between the two. The 1040 is brighter than the 2040 by 800 lumens (3000 vs. 2200), but the 2040 has better contrast (35000:1 vs. 15000:1). That said, when i put both projectors side-by-side and compared the image on the screen, i didn t see a huge difference in either contrast or brightness. In fact, both looked a bit washed out to me, especially in areas of absolute black (such as dark scenes in movies and the bars that appear above and below 16:9 images aka pillarbox). This has a lot to do with the lcd technology both epson projectors use. . To give you an idea, most projectors in movie theaters use dlp technology. Dlp projectors have a high pixel fill factor, which minimizes pixelization for a more realistic, film-like viewing experience. This explains why the epsons look washed out, as lcd shadow detail and absolute black levels fall short. There is also lower color accuracy (although the 3 lcd chips helps with that) and a greater risk of problems should the projector be used for long periods of time. Want to binge-watch the walking dead or play fallout 4 for hours on end? know that lcd panels lose image quality over time. The less the projector is used each day, the less of a problem this is. But if you plan on turning it on for long periods of time you may want to look into a dlp. And let s not forget about the dreaded dead pixels that are common with lcds. . It's important to note that, unlike traditional organic lcd panels, epson uses a special inorganic alignment layer. In theory this should help to eliminate the degradation patterns caused over time since heat and uv light shouldn't affect it the same way. However, in my research, i have found no official claims or concrete statements to confirm or deny this. In fact, a professional installer for over 20 years stated that projector engineers have admitted to him that all lcd projects are subject to degradation. Inorganic versions do last a bit longer, but still suffer from the same problem. As for my experience, i have owned an organic lcd projector and it did develop degradation after several years of use. A bluish glow or stain covered the left side of the screen. I do hope that inorganic (or non-organic) helps to resolve this problem, but there is very little evidence to state the contrary. . That s not to say that lcds are all bad, in fact they have no issues with rainbow effect and generally have a longer lamp life. The epson 1040 lists 5000 hours and the 2040 4000 hours. Even better is the lower cost of bulb replacements. Both 2040 and 1040 use the same replacement bulb (v13h010l88) which runs for around $79. 00 while dlp projector bulbs are more expensive for example, the benq ht3050 bulb goes for $249. 00. . That s not taking into account eco power consumption mode. This is a feature both epson projectors support. If you put the 1040 into eco mode, the lamp life goes from 5000 to 10000 hours. Similarly, the 2040 goes from 4000 to 7500 hours. Not only do you get a longer lamp life and lower power consumption, but the fan noise goes down too. Both projectors in normal mode produce 37. 0 dbs of noise, but in eco mode, the 1040 goes down to 28. 0 db and the 2040 to 29. 0 db. The drawback is that the white light output goes down as well. So, the 2040 in normal mode has 2200 lumens, but in eco mode goes down to 1500 lumens. Similarly, the 1040 goes from 3000 lumens to 2100 lumens. If you are in a dark room with little ambient light, this isn t a problem. But if you are in a conference room with windows, the extra lumens can make a difference, which is another reason the 1040 makes more sense for offices since it has more lumens. For my home theater setup, i keep my projector on eco mode and the image brightness is just fine. Heck, my first projector, the hitachi-pjtx100, only had 1, 200 lumens and projected images plenty bright enough for my eyes. In fact, darker can be better when watching movies. . Another difference is that the 1040 has a native resolution of 1920x1200, which is higher than the 2040 s 1920x1080. Most everything i watch - or device i use - is at 1080, so that s not an issue for me. It just means you can get your plugged-in computer resolution a bit higher (another advantage i see more for multimedia than home theater use). Regardless, both share the same hdtv formats, which are: 720p, 1080i, 1080p/60, 576i, 576p. Note the p in 1080p, which some projectors can t handle (some can only do 1080i). The p stands for progressive scan, which is important for home theaters since the image looks sharper, is more defined than 1080i , and provides better visuals for scenes showing a lot of fast motion (think the bourne identity). . I was surprised that neither epson provides component (rca (y, pb, pr)) ports. This is a plug that older hd devices use. Plus, on newer devices that still support it, you can hook up a third hd (1080) compatible system. For instance, on my benq projector i have two hdmi ports. My ps4 is plugged into one and my ps3 is plugged into the other. Because my benq has component ports, i also have my wiiu plugged in and get hd quality video as a third device. The epsons have two hdmi ports but no component, so there s one less hd option. Surprisingly, epson did add composite (video rca) ports which are used for older non-hd devices, such as vcr players. We re talking 480 resolution, so expect horribly pixelated images when blown up on a screen. Why epson supported older composite but not component ports is beyond me. . Speaking of ports, the 1040 actually has two additional options that the 2040 does not. Wireless lan and usb display. The wireless network adapter is included and plugs into the projector, allowing access to lan or peer-to-peer networks. Using the epson easymp monitor and network projection software, you can remotely access and control the projector. The usb display connection allows a pc to connect without using the vga port. You can also connect a usb device (such as a flash drive, camera or smartphone) or external drive (must be formatted in fat or fat32) and use the projector s pc free feature to view compatible images or movies. The supported images are . Jpg, . Bmp. . Gif and . Png. The only video file format supported is . Avi and it must use linear pcm and adpcm codec or it won t work. The video file also can t be above 1280 720 resolution or larger than 2gb. These seem like interesting features, but are a bit restrictive and take some messing around to be of much use for the practical user. . Overall, both the epson home cinema 2040 and epson home cinema 1040 are more budgeted - entry level - solutions. Dedicated home theater projectors range closer to $1, 500 - $2, 000 and offer better contrast and picture quality. That said, these are viable solutions for businesses with smaller budgets and home users who don t want to break the bank. I much prefer the epson home cinema 2040 for home theaters with its shorter throw distance, cinematic remote and 3d capability. Whereas i like the epson home cinema 1040 for conference rooms as it offers brighter white light output, a presentation friendly remote and higher resolution for pcs. Personally, i would pay a little more and get the benq ht3050 which has an even shorter throw distance, component ports, and a dlp display chip (for darker blacks, less pixelization, and maintained image quality over time). The biggest with the benq negative is the more expensive bulbs and shorter lamp life, but overall i think the quality is worth it. That said, i really don t think you can go wrong with the epson home cinema 2040 or 1040. Just be sure to check your room size and assess the features before making a decision.

R. Erin, Derbyshire

EPSON HOME CINEMA 2040 1080P 3D 3LCD HOME THEATER PROJECTOR Features
Price :    $503.50 (was $778.88)
  • Screen size range: 90-inches from 8 feet; 134-inches from 12 feet. projector dimensions: including feet - 11. 69" x 9. 65" x 4. 69" (w x d x h). excluding feet - 11. 69" x 9. 80" x 4. 49" (w x d x h).
  • Contrast ratio: 35, 000:1; keystone correction: yes; lens shift: no
  • Connectivity: 2 hdmi (1 mhl), 1 rca (composite), 2 rca (1 audio l/r) stereo, 1 vga d-sub 15 pin (computer input), 1 usb type a. please refer the user guide before use.
  • White brightness: 2200 lumens; color brightness: 2200 lumens
  • Warranty: 2 year limited; lamp life: up to 7, 500 hours (eco mode) and up to 4000 hours (normal mode)
Brand :    epson
Color :    Gray/white
Size :    100 inches
Weight :    6.40 pounds
Model :    V11H707020
Quantity :    1
Order click here :    normally ships in 1-2 business days
Home Theater :    Best Video Device (epson product review) for Epson Home Cinema 2040 1080p 3D 3LCD Home Theater Projector available ( Sep 2019 )

VideoSecu LCD DLP Projector Vaulted Ceiling Mount Bracket Adjustable Extension Pole to 26.7 - Black PJ2B 1C9

Was very pleasantly surprised at how substantial, well made, adjustable, and easy to assemble this mount is. I'm using it with an optima eh500 projector, and contrary to some other reviewers, i didn't have any trouble figuring out how to mount to the projector. I did have to remove one of the legs since this projector has only three mounting holes, but the remaining legs were more than equal to the task of security it. Easily adjustable, good wire management (even for the iogear wireless hdmi receiver i mounted to it. The value is arguably unbeatable; many of online store's recommended mounts for this projector were 5x the price and not as sturdy. This thing is very adaptable and should fit nearly any projector.

The videosecu projector ceiling mount is attractive, strong and light weight. Durable black finish comes with the latest design in safety, flexibility and value for many of today's most popular lcd projectors. No-slip adjustment system allows you to quickly and easily fine tune your projector adjustments in order to achieve a perfectly square image. Once your projector is adjusted, it will stay true for as long as you require it to. The unique arm designed arms allows the safe installation for expensive projectors, and it offers adjustment for width and depth, giving maximum versatility for a wide variety of projectors. The mounting system comes with everything you need to assemble a complete mount in a single box. By using the included telescoping ceiling mask, this mount extends from the ceiling 18. 1" to 26. 7". How can i determine if this mount will fit my projector? projectors may have 3 or 4 threaded holes for ceiling mount. First make sure that the projector does not exceed the 44lb weight limit. Next, find out the maximal diagonal of the holes. It should not be over 12. 5". In other words, if the maxim distance of any 2 holes (especially diagonally) is not more than 12. 5", then the mount should fit fine. If your projector has holes more than 12. 5" apart, you need 5" extender (sold separately in our online store store : b0036828ks) which can cover an area up to 17 inch in diameter.

VideoSecu LCD DLP Projector Vaulted Ceiling Mount Bracket Adjustable Extension Pole to 26.7 - Black PJ2B 1C9VideoSecu-Projector-Vaulted-Adjustable-Extension

Videosecu Projector Vaulted Adjustable Extension (pj2b) FAQ.

This holds our projector from the ceiling. Hasn't loosened up yet or anything. It also gives you the option of lifting or lowering the projector a bit which is nice. No ones walked into it so it doesn't hang super low either. -Notice from L. Smith, Peterborough

Click to Show videosecu projector vaulted adjustable extension (pj2b) Details

This mount works great for my benq ht1085st. My only issue is that it holds the projector about 6 inches from the ceiling. This isn't an issue for most people as 6 inches is not that far. However, i have a 140 inch screen so i need the projector to be closer to the ceiling. I will not deduct a star for this as it's properly described. However, it does tend to creep a tiny bit and i've had to tighten the screws a few times. However, i would buy it again for an application that doesn't require a low profile.

Videosecu-projector-vaulted-adjustable-extension-(pj2b) set picture

- . TerryI ordered this for my viewsonic projector on the hopes that it would work. I read a few negative reviews which stated the mount absolutely would not work for the viewsonic projectors. The people who wrote those reviews must be the same kids in kindergarden who could not figure out how to stack blocks. I mean seriously, try thinking outside the box for half a second. I gave this mount four stars four two reasons; . . 1. The instructions do not show anything for a three hole mount like the viewsonic projectors use. It only shows the four hole mount option. . 2. The directions are rather vague regarding the hardware. A little unclear, again, with some thought, the correct parts are able to be identified. . For anybody thinking about purchasing this mount for a viewsonic, just remember you will have to completely disassemble the quad mount. Turn some of the mounts backwards, and remove one of the arms. The mount comes with two short mounts and four long mounts. It took me about fifteen minutes to figure out how to set up the mount. And that was with four screaming children in the house. . Bottom line, this mount is secure and well worth the 25. 00 dollars. It is fully adjustable and comes with all the hardware you need. It even comes with the allen (hex) wrenches. All you need is a drill and a screwdriver.

I wonder why others that have rated it bad have done so . It is truly a universal mount. May be the ones that have rated it bad because they don't know how to use it or are that creative to utilize the features that this mount offers. . I used it to mount viewsonic pjd5134 - yes, the three screw projector, which others have stated that this mount doesn't work with. It took a little bit to figure out how to connect/convert the four legs into working with three triangular shaped mount, however, when i figured it out, it worked like a charm. . This mount twists and turns at many different points giving you full flexibility to to mount and point in a direction of your choice. I love it so far. . Others have stated that it is a bit flimsy, but i take that flimsiness as its flexibility to rotate and turn . Hope my impression of it will last for a long time. So far it has done the job i bought it for . Compared to the mount made for viewsonic that is in market being sold for $150+, this mount does a great job for less than $25. Thanks online store for recommending this mount.

T. Patton, Montana

VIDEOSECU LCD DLP PROJECTOR VAULTED CEILING MOUNT BRACKET ADJUSTABLE EXTENSION POLE TO 26.7 - BLACK PJ2B 1C9 Review
Brand :    videosecu
Color :    Black
Weight :    1.19 pounds
Model :    PJ2B
Quantity :    1
Order click here :    normally ships in 24 hours
Office Sale :    Best Office Electronics (videosecu product review) for VideoSecu LCD DLP Projector Vaulted Ceiling Mount Bracket Adjustable Extension Pole to 26.7 - Black PJ2B 1C9 available ( Sep 2019 )
Price :    $17.99
  • Standard hardware required to fasten the mount to your ceiling and your projector included
  • Exclusive "no-slip" adjustment system; lock in any position; easily release and lock;
  • Steel construction; maximum loading 44 lbs (20 kgs); rotate adjustment left and right 5 degrees
  • Integrated cable management; fits both flat and vaulted ceiling
  • Without extension pole, the height is 5. 9"; with extension pole, height adjust from 18. 1" to 26. 7"

Epson Home Cinema 740HD 720p, HDMI, 3LCD, 3000 Lumens Color White Brightness Home Theater Projector

Experience widescreen entertainment in the comfort of your home with the home cinema 740hd projector. Offering up to 3x higher color brightness1 than competitive models, epson 3lcd projectors ensure vibrant images. The portable 740hd delivers widescreen, hi-def 720p resolution and up to 15, 000:1 dynamic contrast ratio, plus 3000 lumens of color brightness and 3000 lumens of white brightness2. Connect your blu-ray disc player, gaming console or streaming device and project up to 300", on virtually any wall or screen - indoors or out. Hdmi connectivity, a built-in speaker and convenient setup tools make it easy to enjoy hd content out of the box.

Epson Home Cinema 740HD 720p, HDMI, 3LCD, 3000 Lumens Color White Brightness Home Theater ProjectorEpson-Cinema-Brightness-Theater-Projector

EPSON HOME CINEMA 740HD 720P, HDMI, 3LCD, 3000 LUMENS COLOR WHITE BRIGHTNESS HOME THEATER PROJECTOR Advantage
Brand :    epson
Color :    White
Weight :    5.30 pounds
  • White brightness: 3000 lumens; color brightness: 3000 lumens
  • Warranty: 2 year limited; lamp life: up to 10, 000 hours (eco mode) and up to 5000 hours (normal mode)
  • Contrast ratio: 15, 000:1; keystone correction: yes; lens shift: no
  • Connectivity: 1 hdmi, 1 rca (composite), 1 s-video, 1 rca (1 audio l/r), 1 vga d-sub 15 pin (computer input/component), 1 usb type a, 1 usb type b
  • Screen size range: 84-inches from 8 feet; 126-inches from 12 feet
Price :    $549.00 (was $699.00)
Model :    V11H764020
Quantity :    1
Order click here :    normally ships in 1-2 business days
Home Theater :    Best Video Device (epson product review) for Epson Home Cinema 740HD 720p, HDMI, 3LCD, 3000 Lumens Color White Brightness Home Theater Projector available ( Sep 2019 )

Optoma HD29Darbee 1080p 3200 Lumens 3D DLP Home Theater Projector

Style: hd29darbee the hd29darbee is the successor to the world s first home cinema projector featuring vision, the hd28dse. Engineered to deliver an immersive experience in xbox one and ps4 games, blu-ray movies, hdtv programming, home videos and even vacation photos. The integrated vision image enhancement technology utilizes neuro-biologic algorithms to achieve unprecedented detail in skin tones, textures, and reflective surfaces while delivering superior depth, object separation and automatic removal of unsightly residuals. The end result is xbox one and ps4 games, blu-ray movies, hdtv programming, home videos, and photos that are simply mind-blowing and larger-than-life. With 3, 200 lumens and an amazing 30, 000:1 contrast ratio, hd29darbee delivers bright images with deep black levels. Hd29darbee s reference display mode enables accurate color via rec. 709 hdtv color space for rich vibrant colors in blu-ray movies, hdtv programming, home videos, and photos. With 10, 000 hours of lamp life, the hd29darbee requires very little maintenance, allowing hours of gaming and extended viewing of favorite movie and tv shows. The hd29darbee features the latest and greatest digital media interface with support for mhl v1. 2. Mhl v1. 2 enabled hdmi ports enabling mhl devices such as optima's cast pro, roku streaming stick and smart phones to connect directly to the projector to playback music and video, view pictures and even share webpages and other user generated digital media content. Computer compatibility fhd, hd, wxga, uxga, sxga, xga, svga, vga, mac video compatibility 480i/p, 576i/p, 720p(50/60hz), 1080i(50/60hz), 1080p(50/60hz)

Optoma HD29Darbee 1080p 3200 Lumens 3D DLP Home Theater ProjectorOptoma-HD29Darbee-Lumens-Theater-Projector

OPTOMA HD29DARBEE 1080P 3200 LUMENS 3D DLP HOME THEATER PROJECTOR Feature
Brand :    optoma
Color :    WHITE
Weight :    5.50 pounds
Model :    HD29DARBEE
Quantity :    1
Order click here :    -
Home Theater :    Best Video Device (optoma product review) for Optoma HD29Darbee 1080p 3200 Lumens 3D DLP Home Theater Projector available ( Sep 2019 )
Price :    $549.00
  • Reference display mode enables accurate color via rec. 709 hdtv color gamut. i/o connectors : 2x hdmi (1. 4a 3d support) + mhl v2. 1, audio out 3. 5mm, 12v trigger, 3d-sync, usb-a power (1a)
  • 1080p full hd resolution, 3200 lumens, and 30, 000:1 contrast ratio delivers luminous images and profound black levels
  • Next generation vision image processor enhances images to reveal extraordinary levels of detail, depth, lighting, and object separation
  • Brilliant color dazzles with color enhancement while sick profiles enable improved color purity and deeper blacks

VIVO Universal Extending White Ceiling Projector Mount/Height Adjustable Projection MOUNT-VP02W

This projector mount worked perfectly for my epson powerlite home cinema 2000 mounted on a vaulted ceiling. The only thing that turned out bad was the terrible drywall anchors that come with it. I had one stud and needed 3 anchors. The anchors that came with it ended up spinning in the drywall. I had to buy heavy-duty anchors that have a brace that pops open on the other side of the ceiling. I love how you can hide your wires inside the tube and also hides the wire hole in the ceiling.

Mount-vp02w is a brand new, heavy duty, universal ceiling projector mount. Ideal for any home or office, this high grade steel mount is weight tested at 30lbs and designed with adjustable arms to fit most projector brands with mounting ranges from 2" to 12. 5". Mount-vp02w extends from 15" to 23" from flat ceilings to fit the user's needs. Features include 15 degree tilt, 15 degree swivel, and 360 degree rotation to maximize projection angles. Simple tightening of joints makes this as fluid or stationary as desired. This is a quick assembly and comes with common mounting hardware. The projector mount comes in a white finish. Important note: as mentioned above the mounting arms for this projector mount have a maximum reach of 12. 5". Before purchasing, be sure to find the mounting holes on top of your projector and measure the distance between each one (especially the ones diagonal from one another). If all diagonals measure 12. 5" or less then this mount will fit your projector. Compatibility fits most projectors on the market. Distance between mounting holes on back of projector must be 12. 5" diagonally or less high-grade steel supports projectors up to 30 lbs features 15-degree tilt, 15-degree swivel, and 360-degree rotation, hitting all optimal viewing angles adjustable mounting system extends your projector from 15" to 23" from the ceiling surface possesses quick release hooks that detach and attach by loosening and tightening mounting bolts quick assembly and comes with common mounting hardware

VIVO Universal Extending White Ceiling Projector Mount/Height Adjustable Projection MOUNT-VP02WVIVO-Universal-Adjustable-Projection-MOUNT-VP02W

Vivo Universal Adjustable Projection Mount Vp02w (Consumer Electronics) FAQ.

It's not quite universal, as i found when trying to make it fit to my optoma. But removing one of the arms and twisting things around to fit, it seems to work - though it looks a little awkward. The instructions are pretty much word-free and the images are not always that clear, -Notice from P. Anonymous, Leicestershire

Click to Show vivo universal adjustable projection mount vp02w (consumer electronics) Details

I had my doubts about buying this product because my optoma projector had some pretty narrow bolt pattern (almost like a triangle) and i didn't think it would be sturdy even if it did fit. Too my surprise the hardware came with many different sized bolts and once i attached it to the ceiling it is pretty darn sturdy. I can rotate the mount up down left and right in all directions. As long as you properly drill out the sized holes for the ceiling and use the anchor pins properly it will be sturdy. If possible try to go through a stud, that is what i did and for everything included you cant beat the price!

Vivo-universal-adjustable-projection-mount-vp02w-(consumer-electronics) set picture

- G. DonnaFlexible mount. Well built with excellent finish for the price. Assembly instructions aren't good. Actual assembly requires 4 sets of hands with assembly of the bottom section. Main pole isn't large enough to house the power cord. Many extra parts, parts labeled in a complex manner. Why does installation of a simple device be so complicated? lots of patience needed but determination will result in a successful install.

Works good. Thin but very inexpensive as well. Worked well for the kids room i put it in.

H. Widmer, Michigan

VIVO UNIVERSAL EXTENDING WHITE CEILING PROJECTOR MOUNT/HEIGHT ADJUSTABLE PROJECTION MOUNT-VP02W Reviews
Price :    $16.73 (was $17.99)
  • Fully adjustable with 15-degree tilt, 15-degree swivel, and 360-degree rotation, hitting all the right viewing angles
  • Solid construction made entirely of high grade steel, supporting projectors up to 30 lbs
  • Easy installation with quick release hooks that attach and detach by tightening and loosening mounting bolts
  • Telescoping height adjustment mounting system extends your projector from 15" to 23" from the ceiling surface
  • Universal mounting fitting the majority of projectors on the market. distance between mounting holes on back of projector must be between 2" to 12. 5" diagonally
Brand :    vivo
Color :    White
Model :    MOUNT-VP02W
Quantity :    1
Order click here :    normally ships in 24 hours
Ce :    Best Consumer Electronics (vivo product review) for VIVO Universal Extending White Ceiling Projector Mount/Height Adjustable Projection MOUNT-VP02W available ( Sep 2019 )

Suptek White Universal Projector Ceiling Mount Bracket Fits Flat Sloped Ceiling Height Adjustable Extendable Length LCD/DLP Projectors PR05

The mount works great, and does everything as advertised. The only downsides i can give is that it is unintuitive on putting it together even with directions, and it doesn't come with any spare parts.

When pr05 leave our factory, the screw on the extension pole is not fully tightened, which is to prevent the customer from scratching yourselves by pulling the extension pole forcibly. Please do tighten the screw on the extension pole and the base during your installation. Suptek pr05 will not work for your projector, if your projector has holes on the diagonal more than 12'/30. 5cm apart or weighs more than 30lbs/13. 6kg. Please check specifications to see if this mount is compatible with your projector. Specifications:1. Maximum weight supported: 30lbs/13. 6kg2.  height adjust from 10. 62' to 21. 25' (27 - 54 cm). 3. Ceilings supported: regular ceilings (drywall or wooden beams)4. Heavy duty aluminum alloy construction5. Color: white6. Adjustments: tilt range 90 up/down; pan/swivel range 360 . Note: this mount does support the vaulted ceiling/wall. *3-year guarantee;  if you have any issues, please contact us.

Suptek White Universal Projector Ceiling Mount Bracket Fits Flat Sloped Ceiling Height Adjustable Extendable Length LCD/DLP Projectors PR05Suptek-Adjustable-Extendable-Projectors-PR05

White Adjustable Extendable Projectors Pr05 (Suptek) FAQ.

The mount is very neatly made and i like all the aspects of this mount. I have withheld one star because the instructions might have been a little clear. I am an engineer and it took couple tries for me to get it right. Overall very satisfied with the purchase. I would love to see some improvements in future. I like the fact that the configuration of the arms to attach to the projector has so much flexibility. Yon can be as creative as so possible. But just be sure that the overall surface area meet the specifications on the installing instructions. -Notice from A. Kristen, Victoria

Click to Show white adjustable extendable projectors pr05 (suptek) Details

This projector mount is amazing. The setup was very easy and the mount holds my heavy projector with no problems. The best part about it is that i can change angles or mount position whenever i want by adjusting the screws, angling to my liking, then tightening them. When i buy another projector. I will be purchasing this again for that one too. Advice: don't spend top dollar on another mount, this one will do the job (i have a epson 455wi and it isn't light). Hope this review helps you out.

White-adjustable-extendable-projectors-pr05-(suptek) set picture

- E. RochelleWorks as expected. Easy-ish ceiling install. Except for one screw that jammed, because i am unused to installing a ceiling mounted anything. (i used toggle bolts in other areas. ) luckily, i call that screw, the fashion accessory and will use it as part of the way i run wire across the ceiling to the peripherals.

It accomplishes the job of supporting our 10 projector from the ceiling joist (benq ht2050). 3-axis adjustment allowed perfect alignment on the screen. White finish is fine and the mount is unobtrusive yet secure. A previous review commented that their projector fell off. I attribute this partly to design flaw and partly to operator error of not sufficiently tightening down the friction bolt holding the two halves of the column together. There is nothing but that friction fitting holding the two halves together. However, the female threads are not in high quality steel and it is easy to strip the friction bolt - which i almost did before i reached what i thought was reasonable torque with a short allen wrench (i've rebuild engines, so i know the difference between proper torque measured with a torque wrench and gorilla-tight torque). It holds fine now and probably will forever. But the engineer in me worries about it loosening over time/vibration so i'll probably drill and tap another bolt in from the side thru both halves for a positive lock.

M. Guest, Poole

SUPTEK WHITE UNIVERSAL PROJECTOR CEILING MOUNT BRACKET FITS FLAT SLOPED CEILING HEIGHT ADJUSTABLE EXTENDABLE LENGTH LCD/DLP PROJECTORS PR05 Benefit
Brand :    suptek
Color :    Ceiling/wall-extendable-white
Size :    Extendable Length PR05
Weight :    2.20 pounds
Model :    PR05
Quantity :    1
Order click here :    normally ships in 24 hours
Office Sale :    Best Consumer Electronics (suptek product review) for Suptek White Universal Projector Ceiling Mount Bracket Fits Flat Sloped Ceiling Height Adjustable Extendable Length LCD/DLP Projectors PR05 available ( Sep 2019 )
Price :    $16.90
  • 3-in-1 projector wall mount bracket - ceiling installation, sloped ceiling installation, and wall installation
  • Adjustable - tilt 25 up/down, pan/swivel 360 , height from 1. 96"-21. 25", suitable for different circumstance
  • Resistant to rust - ceiling part and projector mounting part are made of cold rolled steel, extendable pole is made of aluminium alloy
  • Package - 1 ceiling mount, 1 standard installation kit, 1 user manual
  • Universal - compatible with projectors whose mounting holes are under 12" and weight under 30lbs (13. 6kg)

VIVO Universal Adjustable White Ceiling Projector/Projection Mount Extending Arms Mounting Bracket MOUNT-VP01W

I can't speak for every projector but for my optima it adjusted very easily and holds it very steady and secure. . I chose to use self drilling drywall anchors that hold 79 pounds each to mount mine since i will be sitting under it. Yes, it's overkill but i want all the action to be on the screen, not when the projector falls and hits me in the head. . It blended right in and does not stand out, it does what i wanted, and it feels like it would support a projector many, many times larger than what i have. It appears to be very well made and i am happy with my purchase. . Easy to follow instructions with no words, just pictures. Genius!

Mount-vp01w is a brand new, heavy duty, all steel, universal ceiling projector mount. Ideal for any home or office, this high grade steel mount is weight tested at 30lbs and designed with adjustable arms to fit most projector brands with mounting ranges from 2" to 12. 5". Mount-vp01w sits 6" from flat ceilings making it low profile. Features include 15 degree tilt, 15 degree swivel, and 360 degree rotation to maximize projection angles. Simple tightening of joints makes this as fluid or stationary as desired. This is a quick assembly and comes with common mounting hardware. The projector mount comes in a white finish. Important note: as mentioned above the mounting arms for this projector mount have a maximum reach of 12. 5". Before purchasing, be sure to find the mounting holes on top of your projector and measure the distance between each one (especially the ones diagonal from one another). If all diagonals measure 12. 5" or less then this mount will fit your projector. Compatibility fits most projectors on the market. Distance between mounting holes on back of projector must be 12. 5" or less high-grade steel supports projectors up to 30 lbs features 15-degree tilt, 15-degree swivel, and 360-degree rotation, hitting all optimal viewing angles obscure mounting system holds your projector just 6" from the ceiling surface possesses quick release hooks that detach and attach by loosening and tightening mounting bolts quick assembly and comes with common mounting hardware

VIVO Universal Adjustable White Ceiling Projector/Projection Mount Extending Arms Mounting Bracket MOUNT-VP01WVIVO-Universal-Adjustable-Projection-MOUNT-VP01W

Vivo Universal Adjustable Projection Mount Vp01w (Office Electronics) FAQ.

Does exactly what you need it to do. I use it to hang my epson 1040 (upside down from the ceiling). Awesome setup. -Notice from U. Wayt, Vermont

Click to Show vivo universal adjustable projection mount vp01w (office electronics) Details

Great adapter which was easy to install and heavy duty. They give you plenty of hardware to go with it which seems to be able to accommodate any kind of projector.

Vivo-universal-adjustable-projection-mount-vp01w-(office-electronics) set picture

- B. LauraCame just as expected. Fits very well to my irulu projector and multiple types of screws are supplied for various types of projector mounting types. The only negative i would say is that the instructions aren't as clear as they could be but one can figure it out no problem if they try. Not sure if they are supposed to come mostly assembled (top half and bottom half just needed to be connected to each other) but there was an opened bag with mine and the screws, washers and spacers were scattered throughout the online store box (see photo). I did manage to find all the pieces i needed though. Just now noticed that value max has the same mount for less.  mount-it! ceiling projector mount height adjustable universal stand fits epson optoma benq viewsonic projectors, 30 lbs capacity (short)

Does it's job well but the instructions are terrible. Shouldn't complain because of how low the price is. Only took about 30 mins to install in ceiling, including making my throw distance calculations and measurements.

F. Lynette, Thurrock

VIVO UNIVERSAL ADJUSTABLE WHITE CEILING PROJECTOR/PROJECTION MOUNT EXTENDING ARMS MOUNTING BRACKET MOUNT-VP01W Highlight
Brand :    vivo
Color :    White
Weight :    2.60 pounds
  • Easy installation with quick release hooks that attach and detach by tightening and loosening mounting bolts
  • Low profile mounting system holding your projector just 6" from the ceiling surface
  • Universal mounting fitting the majority of projectors on the market. distance between mounting holes on back of projector must be 12. 5" or less
  • Solid construction made entirely of high grade steel, supporting projectors up to 30 lbs
  • Fully adjustable with 15-degree tilt, 15-degree swivel, and 360-degree rotation, hitting all the right viewing angles
Price :    $16.99
Model :    LYSB01013QA86-ELECTRNCS
Quantity :    1
Order click here :    -
Ce :    Best Office Electronics (vivo product review) for VIVO Universal Adjustable White Ceiling Projector/Projection Mount Extending Arms Mounting Bracket MOUNT-VP01W available ( Sep 2019 )

Optoma HD27 3200 Lumens 1080p Home Theater Projector

I've had this for a week. Could never dial in a decent picture even with spears and munsil. Hd27 doesn't even see most of the black boxes (if you are familiar with the dvd). . Then today, projector makes a noise like it's winding a clock and bulb is out completely. What a piece of junk. . Update 12/29. I spoke w optoma support via email. They convinced me to exchange and try another. Agreed it must have been a defected unit on arrival. . New one out of the box was noticeably brighter and crisper. Also no noise. Definitely something was wrong with first one from the get go. . Adjusting my rating to 4 stars for now. Make sure this lamp assembly doesn't go out like the last one, but it runs completely different. First one never got a pic dialed in, this one was easy.

The optoma hd27 is an advanced 1080p home theater projector sporting 3200 lumens, 1920x1080 full hd resolution, 1. 1x zoom, srgb support, and 25000:1 contrast ratio. The hd27 is the ultimate home theater projector for watching hdtv programming, latest blu-ray movie releases, and major sporting events. The hd27 is the ideal projector for gamers who prefer big screen gaming. Whether you play with xbox one, ps4, or your personal computer, you'll be impressed with the hd27's advanced optical lens, sharp 1080p graphics, and vivid blacks that produce highly detailed graphics, deep shadows, and astonishing textures. Video and photography enthusiasts can use the hd27's srgb color space to produce rich, accurate color based on the primaries of rec. 709b hdtv specification when used with any srgb-compatible device including both pc's and mac's. Hd27 is mhl v1. 2-compliant which allows mhl devices such as optoma s hd cast pro, roku streaming stick and smart phones to connect directly to the projector without the need for an external power source to playback music and video, view pictures and share web pages and other user-generated digital media content with family and friends . Computer compatibility : fhd, hd, wxga, uxga, sxga, xga, svga, vga, mac . Video compatibility : pal (b, d, g, h, i, m, n, 576i/p), ntsc (m, 4. 43/3. 58 mhz, 480i/p), secam (b, d, g, k, k1, l) hd (1080i, 720p) . Input lag (ms)- 33 . Operating conditions - 5 degree celsius - 40 degree celsius , max. Humidity 85 percent , max. Altitude 3000 meters

Optoma HD27 3200 Lumens 1080p Home Theater ProjectorOptoma-HD27-Lumens-Theater-Projector

Optoma Hd27 1080p 3d Dlp Home Theater Projector (Video Device) FAQ.

Good picture good bang for the buck. -Notice from A. Gladys, Virginia

Click to Show optoma hd27 1080p 3d dlp home theater projector (video device) Details

Quieter than my last projector. Bright picture. No complaints at this price point

Optoma-hd27-1080p-3d-dlp-home-theater-projector-(video-device) set picture

- S. Megan screen hasn't been delivered yet and already very impressed. Great value

Great projector. Clear picture. Easy to set up. Highly recommend.

O. Reed, British Columbia

OPTOMA HD27 3200 LUMENS 1080P HOME THEATER PROJECTOR Advantage
Brand :    optoma
Color :    White
Weight :    5.20 pounds
Model :    HD27
Quantity :    1
Order click here :    normally ships in 24 hours
  • Warranty: 1-year limited parts and labor, 90-days on lamp. lightweight and portable
  • Screen size range: 71-inches from 8 feet; 107-inches from 12 feet. throw ratio 3 1. 48 - 1. 62:1
  • Inputs/outputs: 2xhdmi 1. 4a (mhl), 3d vesa sync port, audio out 3. 5mm, 12v trigger, usb-a (power)
  • Brightness: 3200 ansi lumens. refer user guide below.
  • Contrast ratio: 25, 000:1; keystone correction: yes, lens shift: no
Price :    $536.99
Home Theater :    Best Video Device (optoma product review) for Optoma HD27 3200 Lumens 1080p Home Theater Projector available ( Sep 2019 )

Homegear 110 HD Motorized 16:9 Projector Screen W/ Remote Control

I moved the position of my projector a bit and, as such, had to change out my 100" screen for this 110". The edges of the canvas curl inward just a touch, but not so much that it meaningfully distorts the image (the curl is most prevalent on the black border- by the time it gets to the screen it has almost completely smoothed out. ) i get the sense that this is an issue that might differ from screen to screen, so i wouldn't be surprised if others don't have this issue. That said, it's not severe enough to dock a point. . I haven't timed it exactly but i'd say the screen goes down and up in just under 30 seconds, and seems a bit faster than the previous 100" i owned of the same brand. Not much, but it does seem maybe 2-3 seconds quicker going up and down. From what i can tell, this screen is nearly identical (or perhaps entirely identical) in terms of the quality of image you'd get compared to the brand names that are offered at two or three times the price. If you're concerned about image quality, don't be. I've seen some of the other projector screens in action and this one is at least as good as the others, and is vastly superior to projecting the image on a wall or a sheet.

Transform your lounge into a home cinema in a matter of seconds - kick back, put your feet up and lower your 110" projector screen to enjoy the full screen experience in the comfort of your own home! the homegear hd 110" motorized screens add a whole new dimension of comfort and movie viewing. Homegear screens are made from an engineered three layer construction consisting of: a black pvc back, a terylene fabric middle layer and a matte white pvc top layer. This 3 layer construction and exposed black frame results in a richer and sharper picture quality that enhances the watching experience. In addition, a rf remote control is included, so don't worry about missing a frame, going for a toilet break or swinging by the kitchen! features size and aspect ratio 16:9 aspect ratio 110" diagonal screen size (96 x 54in) case size: 104 x dia 3in product weight: 20. 3lbs screen material high contrast 1. 3 gain screen that is washable with soap and water 1" black masking borders to enhance picture contrast 160 viewing angle perfect for residential or commercial use 3 layer black backed screen which eliminates light penetration and produces top quality color reproduction static resistant, fire retardant, mildew resistant casing & installation durable steel casing with plastic ends- white wall or ceiling assembly simple plug and play system motor system energy efficient, quiet motor that enhances longevity control system rf remote control distance 25m wall mountable control panel for use without remote other information compatible with all projectors (dlp, crt, lcd, hd, 3d) styrofoam packaging for added protection ce certification

Homegear 110 HD Motorized 16:9 Projector Screen W/ Remote ControlHomegear-110-HD-Motorized-Projector

Homegear 110 Hd Motorized 16:9 Projector Screen W/ Remote Control (Office Products) FAQ.

I bought this product used, add said in good condition. Its was only a small dent in the case for the screen, probably just a picky cutomer return. So far screen operation has been good, wall and hand remotes make adjusting the screen very easy. My only complaint if any is that there are about 5-10 lines in the screen towards the top. I will say this i haven't let the screen just hang for more than a few hours, maybe a few days of the screen hanging will fix this problem. This is a great deal for the price but more importantly the size. -Notice from S. Paula, Georgia

Click to Show homegear 110 hd motorized 16:9 projector screen w/ remote control (office products) Details

Great screen. I can tell it only costed $100. But for the money, it works very well. I am projecting with a benq ht2050. There are some ripples in the screen, and near the left and right edges it curves forward a bit. But it is hardly noticeable and i plan to use a heat gun to try to straighten it out a bit.

Homegear-110-hd-motorized-16:9-projector-screen-w/-remote-control-(office-products) set picture

- D. Angela1 year update:. I dropped my review from 5 stars to 4 stars. I wanted to give it 3, but as far as i know it is still the cheapest and only affordable motorized screen on the market, and after all this time waves are minimal. My issue is with the build quality as follows. . I have retracted this screen maybe 10 times since i purchased it a year ago. Today, while closing, a loose wire connecting the motors (inside the housing) got all tangled up with the screen, choking up the mechanism and preventing it from functioning. The wire has now jammed and fallen out in the way of the screen, and is impossible to tuck back in without disassembling the housing and risking more damage. -. . Original review:. Great, cheap alternative to some of the other screens out there. Slight waves in the screen, but it's only noticeable on a blank white picture. The included wall-mount control buttons are a nice touch in case you ever lose the remote. . The housing is 10 feet long, so make sure your wall is wide enough to fit the entire thing. I didn't expect this and had windows in the way, so i ended up having to suspend it from the ceiling, dropping it a couple feet using 2' pipes and flanges from home depot. I'd definitely recommend this option if you have tall ceilings and don't want to crane your neck while viewing.

Fast shipping, product arrived within a week. Box was little bit banged up i guess during transport, but the item was no damaged. Easy setup (just needed to put two nails in the wall strong enough at right places, and was good to go). Product working fine as expected. I haven't seen any waves as of yet. But the screen was shifting with my fan running, so i had fixed with some velcro on the edges to keep it stable. Motor could be a little bit silent and little bit fast, but it works fine for me. The screen smells for couple of days, and i was not able to sit in room and watch a full movie, before it goes away. But it did not bring any dramatic changes to the picture as against my pale yellow wall as i hoped it would. Nevertheless good product for the price.

A. Barbara, Slough

HOMEGEAR 110 HD MOTORIZED 16:9 PROJECTOR SCREEN W/ REMOTE CONTROL Summary
Brand :    homegear
Model :    LYSB00J22TM7Y-ELECTRNCS
Quantity :    1
Order click here :    normally ships in 1-2 business days
Office Sale :    Best Office Sales (homegear product review) for Homegear 110 HD Motorized 16:9 Projector Screen W/ Remote Control available ( Sep 2019 )
Price :    $149.99
  • Other information, compatible with all projectors (dlp, crt, lcd, hd, 3d), styrofoam packaging for added protection, ce certification
  • Motor system, energy efficient, quiet motor that enhances longevity, control system, rf remote control distance 25m, wall mountable control panel for use without remote
  • High contrast 1. 3 gain screen that is washable with soap and water, 1" black masking borders to enhance picture contrast, 160 viewing angle perfect for residential or commercial use, 3 layer black backed screen which eliminates light penetration and produces top quality color reproduction, static resistant, fire retardant, mildew resistant
  • Size and aspect ratio, 16:9 aspect ratio, 110" diagonal screen size (96 x 54in), case size: 104 x dia 3in, product weight: 20. 3lb
  • Casing & installation, durable steel casing with plastic ends- white, wall or ceiling assembly, simple plug and play system

Epson Home Cinema 2045 1080p 3D Miracast 3LCD Home Theater Projector

I have been running this projector almost nonstop for 8 months with absolutely no problem. It does amazing 3d and works great in a moderately lit room. In a well (brightly) lit room it does quite well, until the scene goes dark. I have read some reviews that say that the fan can be quite loud. I have found that after it has run for a couple weeks and it breaks in, it is quite quiet. (ha, ha, ha! ). It is very easily cleaned with canned air. The filter is very easy to blow clean and as long as you keep it cool you should have no problems. (i have found that if you shoot the canned air into the back of the projector while running, it will shoot flames out of the front. So. I'm thinkin that is going on the "don't do that" list. )

The home cinema 2045 wireless projector is designed to be your home entertainment hub, delivering full hd 1080p content from an array of devices. Offering up to 3x higher color brightness than competitive models, epson 3lcd projectors ensure vibrant images. The projector features up to 35, 000:1 dynamic contrast ratio, advanced image processing, plus 2200 lumens of color brightness and 2200 lumens of white brightness. Enjoy hd movies, games and more with two hdmi ports and mhl, or wirelessly stream content via miracast and intel widi. Use your blu-ray disc player, gaming console, streaming device, tablet or smartphone and project up to 300".

Epson Home Cinema 2045 1080p 3D Miracast 3LCD Home Theater ProjectorEpson-Cinema-Miracast-Theater-Projector

Epson Home Cinema 2045 1080p 3d Miracast 3lcd Home Theater Projector (v11h709020) FAQ.

The picture quality is amazing on this item, it is bright and crystal clear. I had some problems setting it up because my old projector had to be back quite a bit further than the epson but once i did get it set up i was very impressed with the quality and with the ease of use. The other thing i checked on this was the price of the projector lamp, on my old projector the lamp was over $250. The epson has a range of bulbs available by different manufacturers from $30 to $65. Also the lamp should last over 6000 hours which is twice as long as the average lamp life on my old projector. -Notice from J. Erin, Arkansas

Click to Show epson home cinema 2045 1080p 3d miracast 3lcd home theater projector (v11h709020) Details

Fantastic projector for the price. The fan is a little loud if you have it in the highest quality mode, but the lower mode is almost indistinguishable and still light years better than most other projectors. This is the perfect addition to my home theater. I couldn't be happier.

Epson-home-cinema-2045-1080p-3d-miracast-3lcd-home-theater-projector-(v11h709020) set picture

- Q. FinchValue for money and excellent product. You will have to see it to believe it. I have seen demos in premier stores of the high end projectors and also a couple at my friends' house. I was a bit skeptical to purchase in the beginning because of what the product claims to do at the price, but it does it all. 2d to 3d conversion, wireless streaming, easy setup, mhl availability and most importantly - picture clarity. It's truly hd. Even in eco mode (cinema display) it is atleast 4x better than your regular dlps. Works very well even in ample light - the darker the better ofcourse. The best part of it is auto keystone, such low fan noise that you will hardly notice and a fantastic speaker. I have mine hooked to a home theater, but will not shy to use the speaker on the projector. Its an excellent choice at the price. I have projected mine onto the wall and the clarity is mesmerizing.

This protector is easy to set up and easy to use. The keystone feature, multi-function remote, wifi and casting capability are my favorite features. It wirelessly connected to my g6 easily without having to use an extra google cast device or similar. The picture quality is vivid in dynamic mode however i noticed when casting, the sharpness and clarity do not stay consistent throughout. A very minor flaw. The unit itself heats up very quickly too so make sure you put it in a well ventilated space because it could easily raise the temperature in the room when it's not on eco mode. The internal speaker is sufficient but i definitely recommend connecting it to a more powerful external speaker system. One thing i found frustrating was trying to use the bluetooth feature. Neither my bluetooth speaker nor my bluetooth headphones would connect.

A. Lindsey, Calderdale

EPSON HOME CINEMA 2045 1080P 3D MIRACAST 3LCD HOME THEATER PROJECTOR Advantages
Brand :    epson
Color :    white
Weight :    6.90 pounds
  • Full hd 1080p, widescreen, 3d performance - for movies, games and more, up to 300" on virtually any wall or screen
  • Focal length: 16. 9 - 20. 28 mm; zoom ratio: 1. 0 - 1. 2 manual
  • Up to 3x higher color brightness, and reliable performance - 3lcd, 3-chip technology
  • Color brightness: 2200 lumens, white brightness: 2200 lumens
Price :    $499.99 (was $640.00)
Model :    V11H709020
Quantity :    1
Order click here :    normally ships in 1-2 business days
Home Theater :    Best Video Device (epson product review) for Epson Home Cinema 2045 1080p 3D Miracast 3LCD Home Theater Projector available ( Sep 2019 )

Optoma GT1080 1080p 3D DLP Short Throw Gaming Projector

Experience games and movies the way you have never seen before on an optoma gt1080 high definition gaming projector. Designed for serious gamers like you, the optoma gt1080 delivers super-fast 2800 lumens bright hd games to the screen with stunning color accuracy and a 25, 000:1 contrast ratio for maximum image detail and improved visibility. Allowing you to acquire and assess information easily and to formulate a faster, more accurate response to defeat your opponents. Equipped with the level of all digital connectivity you need for today s gaming gear, the optoma gt1080 will keep you on top with two hdmi ports, mhl connectivity, vesa 3d sync port, razor sharp 0. 5:1 short throw lens to deliver larger than life images even in space constrained environments, powerful 10 watt audio, 12 volt output, whisper quiet operation and up to 6500-hour long lamp life for worry-free gaming.

Optoma GT1080 1080p 3D DLP Short Throw Gaming ProjectorOptoma-GT1080-1080p-Gaming-Projector

OPTOMA GT1080 1080P 3D DLP SHORT THROW GAMING PROJECTOR Advantage
Brand :    optoma
Color :    White
Weight :    5.80 pounds
Model :    GT1080
Quantity :    1
Order click here :    normally ships in 1-2 business days
  • Screen size range: 111-inches from 4 feet; 166-inches from 6 feet
  • Contrast ratio: 25, 000:1; keystone correction: yes, lens shift: no
  • 1-year limited parts and labor, 90-days on lamp
  • 2 x hdmi (1. 4a 3d support) + mhl v1. 2, audio out 3. 5mm, 12v trigger, 3d-sync, usb service
  • 2800 ansi lumens
Price :    $590.61 (was $699.99)
Home Theater :    Best Video Device (optoma product review) for Optoma GT1080 1080p 3D DLP Short Throw Gaming Projector available ( Sep 2019 )

Epson Home Cinema 1040 1080p, 2x HDMI 1 MHL , 3LCD, 3000 Lumens Color White Brightness Home Theater Projector

The home cinema 1040 projector delivers bright, full hd 1080p widescreen entertainment at home. Offering up to 3x higher color brightness1 than competitive models, epson 3lcd projectors ensure vibrant images. Portable and easy to use, the projector features up to 15, 000:1 dynamic contrast ratio, plus 3000 lumens of color brightness and 3000 lumens of white brightness2. Connect your blu-ray disc player, gaming console or streaming device like chromecast, and project up to 300", on virtually any wall or screen. Two hdmi ports, mhl3 connectivity, a built-in speaker and convenient setup tools make it easy to enjoy hd content out of the box.

Epson Home Cinema 1040 1080p, 2x HDMI 1 MHL , 3LCD, 3000 Lumens Color White Brightness Home Theater ProjectorEpson-Cinema-Brightness-Theater-Projector

EPSON HOME CINEMA 1040 1080P, 2X HDMI 1 MHL , 3LCD, 3000 LUMENS COLOR WHITE BRIGHTNESS HOME THEATER PROJECTOR Summary
Brand :    epson
Weight :    5.70 pounds
Model :    V11H772020
Quantity :    1
Order click here :    normally ships in 1-2 business days
Home Theater :    Best Video Device (epson product review) for Epson Home Cinema 1040 1080p, 2x HDMI 1 MHL , 3LCD, 3000 Lumens Color White Brightness Home Theater Projector available ( Sep 2019 )
Price :    $504.99 (was $682.77)
  • Screen size range: 80-inches from 8 feet; 119-inches from 12 feet
  • Connectivity: 2 hdmi (1 mhl), 1 rca (composite), 1 rca (1 audio l/r), 1 vga d-sub 15 pin (computer input/component), 1 usb type a, 1 usb type b
  • White brightness: 3000 lumens; color brightness: 3000 lumens
  • Warranty: 2 year limited; lamp life: up to 10, 000 hours (eco mode) and up to 5000 hours (normal mode)
  • Contrast ratio: 15, 000:1; keystone correction: yes; lens shift: no

videosecu lcd/dlp projector ceiling mount bracket white fits both flat or vaulted ceiling pj2w 1ca Price : 11, was : 16 as 2018-12-11
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Videosecu Projector Ceiling Bracket Pj2w (Office Electronics) Reviewed by on vufes.com

Top videosecu projector ceiling bracket pj2w (office electronics) Content

F.A.Q. for videosecu lcd/dlp projector ceiling mount bracket white fits both flat or vaulted ceiling pj2w 1ca

I was a little doubtful of getting this bracket because noone on the other reviews or questions answered the question with a definite answer. A lot of people we're asking if this works with the epson 2030, everyone's answer was "it should, it's a universal bracket and it should work. " that is not the answer i wanted to see. The definite answer to question is "yes", it fits the epson 2030. As you can see in the picture, only 3 arms will attach to the projector. That's a fault on the projector, not the bracket, but it still works though.

A number of questions have been asked here.

Showing 20 Q&A on VideoSecu-Projector-Ceiling-Bracket-PJ2W

(0) Question: Can you use it for any projector


(1) Question: Does this work with the benq w1070


(2) Question: What is the height of the base?


(3) Question: Does this come with the extension poles


(4) Question: Does this mount allow you to easily connect/disconnect your projector for portablilty


(5) Question: Anyone use this with the optoma ml500?


(6) Question: Has anyone tried this mount on the new epson powerlite home cinema 3000, 3500, 3600 projectors yet? extenders needed?


(7) Question: Does this work with the lg pf1500?


(8) Question: I bought this projector mount but it doesn't comes with the screws and bolts as described in the manual. isn't that supposed to be part of the package


(9) Question: Does this fit the lg pw800 mini-beam projector?


(10) Question: Can you run the cables inside the arm directly from the ceiling (ie: receptacle in attic) without having to mount a receptacle beside the projector?


(11) Question: Hd25e?


(12) Question: What tools, exactly, are needed to install this mount?


(13) Question: Does this fit the optima hd27?


(14) Question: Lg electronics pa75u slim led projector, can it fits this model?


(15) Question: Purchased as it was recommended for my epson 730hd. it doesn't fit. can it be adapted?


(16) Question: Can this be a stand mount? i don't want to install it on ceiling



(note) Question: where/how to get Videosecu (manufacturer's brand) accessories & similiar Videosecu's products

Click to Show/Hide the Answer
Answer:

https://vufes.com/videosecu-projector-ceiling-bracket-pj2w-208600idc0k2/

Click on the marked text to copy to Clipboard

Setting up for a three arm configuration took some work. The hole for the middle arm is too close to the hook wall to get a wrench fully on to tighten the bolt. The ceiling bracket lacks surface space so its prone to wiggling side to side when making adjustments. Maybe a wider wing on the next iteration would be nice. Fine tuning the position of the projector once mounted to the ceiling bracket took a bit of time, but i think that goes for any ceiling mount. . Once mounted and adjusted, the hex screws hold everything tightly in place. Took a few hours at most, but i'm quite satisfied with the mount. I didn't use the extension as my ceiling wasn't extremely tall. I'd recommend this to anyone needing a good ceiling mount on a budget.

#Videosecu Display 100x100 200x100

Accessories & Supplies 704182, Electronics 282271, Mounts 11966901, Projector Mounts 12576901Top Videosecu Projector Ceiling Bracket Pj2w (Office Electronics) FAQ Content

Best videosecu projector ceiling bracket pj2w (office electronics) in review

This mount is well built and easy to install. I didn't have any issues making it fit my benq w1080st projector and mounting was pretty straight forward. There is one issue with this mount - they fixed all points of movement with bolts/screws - except one! . . If you look at the picture you can see a bolt that goes in on each side of the lower section, except it isn't tightened down with a nut! it has a retaining washer on the inside of the u-shape mount that doesn't hold it tight. After setting up the projector and locking everything down, it is still allowed to rotate and move slightly because this location isn't fixed. . Remove these two pins and replace with a small bolt/nut with nylon washers and it will be a stable mount. Not sure why they went this way, kinda silly. . Thanks! . Mike

S. Lorenz, District of Columbia

You might like to see 120 Inch Portable Projector Screen Bag, 120 16:9 4k Hd Foldable Indoor Outdoor Movie Screen Home Cinema Theater Party, Support Double-sided Description: This 120 Inch 16:9 Portable Tabletop Projection Screen Is The Most Compact And Travel-friendly Option For Small Meetings And Mobile Presentations. This Unique Projector -120 Inch Portable Projector Screen Bag, Gbtiger 120 16:9 4k Hd Foldable Indoor Outdoor Movie Screen Home Cinema Theater Party, Support Double-sided Projection
  1. Attribute: Upgrade Hole Version : The Grommets Are Upgraded, It Is More Solid. Hanging Holes Offer Easy And Quick Installation, You Can Use Nails, Hooks, Ropes To Hang It Indoor Or Outdoor.
  2. Attribute: Screen Material : It Is Made Of High Quality Synthetic Fiber, Mildew Resistant, Easy To Clean With Soap And Water. And It Is Much Thicker Than Other Projection Screen, Lower Light Transmission. Also, Much Brighter And Will Project Sharper Image. Supports Double-sided Projection.
Bargain Inch Portable Projector Screen Gbtiger (Ce Accessory) 189751302 Hzr Us Inch Portable Projector Screen Gbtiger (Ce
Or you might like to consider Soundcore Official Travel Case Soundcore/soundcore 2 /motion B Bluetooth Speaker - Pu Leather Premium Protection Carry Soundcore Travel Case The Official Carry Case For Soundcore And Soundcore 2 From Anker, The Choice Of 20 Million+ Happy Users Industry-leading Technology All-round Defense Soundcore -Anker Soundcore Official Travel Case Anker Soundcore/soundcore 2 /motion B Bluetooth Speaker - Pu Leather Premium Protection Carry Case
  1. Details: Made-to-measure: Tailor Engineered To Snugly Hold The Soundcore, Or Soundcore 2. An Interior Pocket Carries All Necessary Cables In One Convenient Location.
  2. Details: Premium Material: High Quality Pu Leather Provides A Sleek Finish, And Leading Durability - Including Water-resistance.
Half Price Anker Soundcore Official Bluetooth Speaker (Portable Audio) Ak A3502011 Anker Soundcore Official Bluetooth Speaker (ak

H. Ophelia, Bath and North East Somerset says

Works well, very adaptable with the arms and sliders. I bought this mount for a 3-hole epson 2040 and it works very well with a 3-arm config. This product comes with a lot of hardware, but assembles pretty quickly. I was able to put it together in about 20 minutes. The extra hardware is mostly to adapt to the different projector mounting threads, so most of it is not needed. Using the 5th hole to make a 3-arm configuration made it very easy to place the mounting bracket closer to the projector's centre of gravity. The trick is to reverse one of the feet (the one for the rear hole) in order to better center the bracket. The image shows the result. Overall very pleased with this mount! cannot beat it for this price.

Y. Harrison, Cumbria

Able to set it up in about 2 hours with most of my time organizing and troubleshooting. I think the parts are plenty good in quality. The instructions are not the greatest. If you take your time and think about what you are doing and what the instructions suggest, it will go up fine. Lay out all the parts as shown in the instructions which makes it easier to install what you need. Be sure to use the washer spacers to attatch to the ceiling bracket. The attatched photo should help. Plenty of adjustments to aim the projector once done as can only get close to the center of gravity given the attachment points for the 2030. I love it.

O. Kimberly, Iowa says

This is a very solid unit and i like it overall. Adjustability for pivot along two axes and solid build quality. As some have mentioned, the assembly instructions could be a bit better. I am very mechanically and technically inclined and it took me a few minutes to figure out how to put this thing together. It didn't help that all the nuts and bolts come in one bag and the instructions seem to include parts in the parts listing that were used on the pre-assembled portions, so at first glance, it seems like you got short changed. All the pictures of the parts are pretty generic, too. Like they show the same icon for all the washers but put different size designations on them. If you're not familiar with metric bolts and washers, it could be really confusing. . The term "universal is a bit questionable. I got this to use with an acer x1261 and it is not a good match at all. There are only 3 mounting receivers on the underside of that projector and they are very close together and in an offset triangular pattern. As it comes out of the box, you can't get more than 2 of the claws on the mount to line up with any of the holes. The m3x8 screws that are included are also too short to pass through the needed washer, the hole in the mounting arm and hit threads in the projector, as the receivers are inset very deep in the casing. After about 15 minutes, removing one of the claws, flipping some bracketry and twisting things around in a manner than i'm sure the manufacturer never imagined, i just barely managed to line up with all three holes. Then i had to hunt around town for some longer screws. I couldn't find any m3x10 or 12 so i had to get m3x16, which were too long and i had to grind them down (i guess i could have used some spacers or a handful of washers). . Anyhow, i'm going to stick with it because it's solid and i've gotten it working but i'd save yourself some headache and look for a different mount if you're getting an acer x1261.

F. Stacey, South Carolina

I bought this to mount an epson powerlite home cinema 2000 projector to my basement ceiling. For the most part, it worked fine, but it did not have enough height adjustment for me to be able to get a geometrically correct screen image without having to use keystone. And when you use keystone, you lose screen resolution (which is bad). Ideally, you want to mount any projector so that it creates a rectangular, squared off image without any digital keystone. This assures that all of your pixels are being used to create an image, instead of shifting some of your available resolution outside the active picture area. But i digress. . First of all, my mount came with all of the necessary hardware (screws, washers, etc. ) and the instructions were pretty clear. The only extra tool i needed was a drill for the ceiling mount holes and a philips head screwdriver. The mount comes with two allen wrenches to adjust the rest. The videosecu mount comes with an adjustable extension arm. If you want your projector right up against the ceiling, you can mount it without using the extension arm at all, and this will put the top of your projector 5. 5" from the ceiling. For me this was just slightly too high to get a squared off image on my 92-inch screen which is permanently mounted to the wall. . So i tried the extension arm, which drops the projector down significantly lower, with a range of around 16. 9" to 25. 6" and this was slightly too low (i feel like goldilocks! ). At the least amount of extension (16. 9" from ceiling), i was able to square off my projection image using about +7 on the vertical keystone scale. This isn't terrible, and did create a nice-looking image for most content, but putting up a 1080p test pattern showed that the view-able image was no longer getting the full 1920x1080 pixel resolution. In actual viewing, this becomes noticeable mostly with text as in movie credits, and a subtle loss of detail on some movie content. . The only other issue i had with the mount was due to my projector having three instead of four mounting holes. The mounting interface has four adjustable feet that screw into holes on the bottom of the projector. Most projectors have four holes but the epson home cinema 2000 and 2030 have three holes. The manual that came with the mount suggests that you remove two of the feet and place one of them in a fifth hole that is located between two of the others on the mounting plate. The problem is that the mount i received has no fifth hole - it's simply not there. It is pictured on the videosecu web site with a fifth hole, so i'm guessing they may have added this hole to a later version of the mount and i may have gotten old stock. I ended up leaving all four legs on the mount and just used three. Using two of the long feet and one short foot reversed (for the projector's center hole), i was able to get a nice tight mount, pretty close to the projector's center of gravity so it was not pulling in any one direction. . It's important to note that this requirement to use keystone may or may not affect you if you use this or any other projector with the videosecu mount. My issue is due to a couple of things: the screen is already mounted in a fixed location (i can't move it up or down) and the epson home cinema 2000 and 2030 projectors have a fairly unique throw angle. These projectors have 92% of the image above, and 8% of the image below the lens center line. You reverse these numbers when mounting the projector upside down from a ceiling. On a 92-inch screen, this means the lens must be about 3. 5 to 4 inches below the top of the screen in order to get a square image without keystone. If your projector has a different throw angle, or if it has lens shift, or if you have higher ceilings (mine are about 8 feet) or more flexible screen mounting options, then this videosecu mount may be a perfect fit. . Other than the need to use keystone in my specific case, the videosecu pf12w offers decent adjustability and performance for an excellent price. I was able to adjust the tilt in all directions to hit the screen properly and the projector locks in place pretty well so even the occasional light bump (from my head) does not misalign the image. If it weren't for the need to use keystone to square the image, i would be extremely satisfied with this mount. As it is, i'm going to try out epson's own universal projector mount with its optional adjustable extension column to see if that gets me the exact height i need. Based on the specs, i think it will.

G. Watson, Solihull says

This thing has the worst instructions, but let me say that it is sturdy as hell. It took me forever to figure out how to interpret the instructions and apply to my optoma gt1080 projector. The projector seems to want to not stay exactly in place after tightening down the bolts. I'll have to look at it again to see if i can tighten them more. I do not worry about the projector falling because in that area it is very good. I did have to go to lowe's to buy screws for my optoma gt1080 which was 3 12mm m4 bolts (i believe) you can look up the manual online for that projector, but i don't blame this product for not supplying that. Now actually figuring out how to position the bracket was a 30 minute process and like a puzzle. This part ruined the product for me more than anything else. But i will post a picture that satisfied me the most in order to actually mount it to my projector. It's eh. Cheap and alright.

U. Williams, Languedoc-Roussillon

Great bang for the buck mount. It works with my 3 point projector infocus 3118hd. . Pros, seems strong. Cheap. I could have went with the cheaper unit (without the extension), but i wanted to make sure i would have it, if i needed it. . A few issues, maybe just nit picks. . 1) i mounted the ceiling bracket sideways. Because my beams run left to right (not back to front). I think the part marked "90 degree swivel adjustment" should be a "180 degree swivel adjustment" it seems like the projector wants to drop down a little lower, like it wants to center itself at 91 degrees. If that makes sense. Think of looking at a swing set from the side. The swing naturally sits at the bottom. What if the swing was sitting forward a few degrees (as if the set was on a hill). I think projector wants to drop down to center a micro centimeter more. . I want the option of being able to move it just a bit more on that access. I may later take it down and use my drill to drill out that quarter circle of an opening just a bit more. Or i might place a small spacer on one side of the mount which would offset the swivel opening so the projector can hang down and center itself a tad better. I am finding it difficult to get a perfect line up with my screen, but not sure its because this small issue. . 2) the way the bracket (piece that is screwed onto your projector) connects to the mount (piece bolted to ceiling) is funky. The bracket is drastically less wide then the mount, so you have to use a spacer on one side, but it doesnt matter because the screw that goes through the "90 degree swivel" opening (i mentioned above) is short and pulls the bracket right to the mount (on 1 side). Why not just make the bracket piece wider? . . 3) if they made it wider it could fix issue 3. There is no way to tighten the "10 degree rotation adjustment" screws. They are 2 screws in a tight spot. I was able to use my finger a bit, maybe i need a slim wrench? , if they widened the piece above the screws, and put the screws in the other direction (screwed down rather than screwed up) you would have more room to tighten them. . Any tips on getting it to frame on the screen better are always welcome!

P. Melissa, North Somerset says

Works great. The hanger is still a little loose even when tightened all the way. I have everything tight so it doesn't move around the bolts, it's just around the points where the arms meet and places where parts overlap. This actually helps it in the end as it can be adjusted just by pushing it one way or another without loosening any bolts, it doesn't need this too often because it would take something shaking or a cord pulling to make it get a hair out of line. One other thing to mount some projectors you may have to get creative as i needed 3 of the short mounting g arms and it came with 2, so i had to make one of the long arms a short one by removing a half inch in length. I read a review before buying this and it said pretty much the same thing, but for the price this is not a big deal at all. Overall it is a very nice mount for the cost and keeps my projector out of harm's way.

K. Isabel, Croydon

I have a drop ceiling and needed to have my optoma hd20 hang below the tiles but attach to the ceiling. This worked out quite well as i could attach it to the side of the support beam and have it hang down through a right-sized hole for the post in the ceiling tile. For the price it works well and the many various ways you can adjust the mounting points with 4 long and 4 short arms was daunting at first. Looking at reviews here and seeing photos of it on the hd20 made that a non-issue. Make sure you follow instructions, tighten things when done, and test it before putting your expensive item under it. As another suggested, give the mount and hanging post some of your body weight to ensure it has a good mount that will last. . The reason i gave it 4 instead of five is that i had to go buy on additional piece for stability. I found with people upstairs it would move a little. I had to get a bracket that wraps around the post to the cross beam to help secure it. This is especially apparent if you jack in a laptop or another device to an open connector, like hdmi2, to see photos or whatever. Then the things would shift away from the projection screen. After putting in this bracket, it has a lot less movement.

Z. Parker, St. Helens says

After viewing several mounts i decided on this videosecu mount. It came with all of the components to mount my projector and more. The mount came with all of the machine screws, washers and plastic bushings i needed to secure my project without running to the hardware store. It also came with the allen wrenches needed to assemble the mount. After a few minutes of reading through the instructions i was able to assemble the arms in a configuration necessary to securely attach the mount to my epson vs330. I chose not to use the extension arm for my configuration but it is long enough to be used on a vaulted ceiling. Once assembled the mount is sturdy and allowed for all the vertical and horizontal adjustments to align the projector perfectly. I would highly recommend this item.

V. Cassella, Rhode Island

I ordered this originally for the optoma hd20 projector, however, when the hd20 started displaying vertical lines out of the box i went ahead and got the viewsonic pro8200 instead. This robust projector mount was able to successfully hold even the pro8200. . All hardware is included for a whole bunch of projectors. The only problem is you have to do a lot of trial and error with the arms to get the alignment correct. But once you figure that out it's pretty easy. Mounting options are also aplenty. I had to do a lot of trial and error with that too till i got the perfect height and alignment. . The reason i'm taking away one star is because the enamel paint on my mount was severely cracked on the main mounting arm, however, i think it was structurally still safe to use it, so i've installed the pro8200 on that anyway. Once installed it holds the projector pretty steady. The quality of the materials while not top notch is still pretty good and solid. . If you're handy this mount will serve you well, if not, you may possibly need some help with the installation. The flexibility is what makes this a little confusing to install, otherwise it's great value for money. I paid twenty bucks for this and i think it's worth paying even thirty bucks (current price) as compared to some of the more pricier ones out there that don't seem to provide the flexibility in mounting options. . I would strongly recommend this universal projector mount as being well built and providing value for money, albeit for some trial & error during installation.

X. Nicole, Vermont says

I would have bought pj1w model ( and saved some money. I believe the extension pj2w additionally have of no use. If you are not looking for a specific requirements to extend the projector a lot from wall, just go for pj1w and save some money. Overall product quality is ok - the most difficult part was to keep the projector leveled, due to the weight of the projector and cables. The mounting hands were not strong to hold it tight and was always slipping off how much ever i tightened it. Apart from that its a descent product

A. Rochelle, Ontario says

After looking at many projector mounts and briefly considering building one from scratch, i bought this one. It's both well made and well suited to the job. The price is fantastic! the instructions and illustrations are helpful. With a couple of hours for experimentation and final installation i've mounted an optoma hd25e so it both adjusts easily and holds the position i've set. . I opted to leave the adjustments tightened just enough to firmly hold position, but loose enough that i can tweak them by hand if needed without tools. I had worried that fine adjustment might be difficult, but have found it easy to tweak every adjustment by hand to within 1/16" on screen. . This mount is strong enough to securely hold many times more weight than my projector. I also like that if ever desired i can dismount the projector from the ceiling simply by removing one screw to lift it off the safety catch, then three more screws if i want to remove the mounting bracket from the projector. This will be very handy if/when i want to take my projector to an event or replace the lamp. . Everything i needed was included in the package except a phillips screwdriver, and a pair of needle nose vice grips (a simple open end wrench would be better but i didn't bother to dig one out of my toolkit). . Caveat: if you're seeking simplicity, buy the expensive mount made solely for your projector and hire someone to install it. For anyone with some basic understanding of simple tools and ability to improvise, this mount is easier to figure out than most ikea furniture i've encountered. For the majority of projectors it would probably be even easier to install than it was for me. . Details:. Keep in mind this is a "universal" mount, so you may need to improvise some depending on how "standard" your projector's mounting connections are. Improvising with this mount was easy, because it's designed with lots of flexibility. Getting it to work with my optoma hd25e took an hour of experimenting with several options before choosing, but it was great having several choices and the actual installation only took another hour or so. . I ended up using only three of the four adjustable sliding mounting arms, and reversed one of them in the slide so that i could position the bracket at the projector's center of gravity (cg). The cg could have been left off balance because there's ample strength in the mount and adjustments, but i wanted to ensure there's no creep over time so i took the extra time to balance the mount (when held in my hand by the bracket, the projector hangs at something near my target angle when installed). Reversing that one sliding bracket also required removing the slide itself and shifting it to another hole for mounting to the main bracket. Doing that enabled me to place the cg where it needed to be. I placed the fourth sliding arm pressed firmly atop the projector's vertical tilt adjustment foot thinking that might help with fine vertical adjustment, but that was totally unnecessary. . The distance i wanted from the ceiling is in the range not available with this mount. It could be changed fairly easily by simply cutting the two sliding metal channels that comprise the extension arm. Doing that would reduce the range of extension available to include the distance i wanted. Instead i opted to mount it without the extension and adjust the screen placement instead. In my case, since i use a tilted rigid foam core screen with a taller aspect ratio than my hd25e projector, i simply tilted the screen backward a couple of inches and shifted the image placement toward the top where i wanted it anyway. Another option would have been to tilt the extension arm, and thus gain another inch or two of reduction in distance from the ceiling, but doing so would make the projector off cg and thus potentially less stable long term. The amount of tilt in the extension would be limited by the angle adjustment limits on each end of the extension.

N. Julie, Kansas

Mount is very versatile, i. E. , includes ability to make many adjustments for positioning projector. Mine arrived w/o assembly instructions, but an inquiry to manufacturer resulted in them being e-mailed to me within minutes. I had to do some tweaking to get bracket to mount onto my optoma hd28dse projector, but it in the end it worked fine. One word of caution is that bracket should be located as close to projector's center of gravity as possible. When i first secured bracket to projector it seemed to be in a logical position. But when i lifted projector by bracket i could tell it was "off-center. " fortunately bracket allows for adjustments and i relocated it to get closer to projector's center of gravity.

J. Guest, Michigan says

For the price i have to say it works well, its painted and matches the white ceiling. It has a minimal footprint so it doesn't look like some huge post hanging from the wall. There were only a few minor cons i ran into with this product. I could not fit a power cable with a thick jacket through the post unfortunately because it interfered with the locking bolts that run through the middle of the post. The other flat vga, hdmi, and cat6 were no problem, but i just ran them all together and zip tied them to the outside of the post on the opposing side of traffic to keep them somewhat hidden. The keystone was off when i tried to initially mount it without the post at the ceiling height i had it at, so i put the post in which put the keystone off in the opposite direction very slightly, so i missed the sweet spot between the minimum length of the post and straight mounting it. Someone else supposedly cut the post down which could be an option for me as well, but its close enough since i just project onto a wall in a living space, this is not a full time theater room for me. . I pre-drilled the holes to the ceiling beam and used a battery powered craftsman right angle impact to snug the bolts in the last bit. Someone else said the bolts were crap after they broke the heads off. Wow they must have over torque'd the & % out of those bolts without creating a pilot hole. I have an older legacy sony 720p sony vpl-vw10ht with 3 mounting holes. The universal bracket did work, it just took some creative mixing and matching of the arms provided to get the mount to sit 90 degrees to the mount. I was able to mount the 4th arm and tuck it close in case i ever use it with another projector or a future homeowner needs it. I think this would be expected for most universal mounts. It worked though and that was the key. The only other issue i had was the roll adjustment +/- 15 degrees needs an external tooth lock washer to create increased bite into the metal. I had to really tighten those two screws down to hold the offset weight of the projector in the adjustment angle i needed otherwise they would slide. The instructions were a little vague in some places, but if you took the time you could figure it out if you have half a brain which i guess is in short supply nowadays from reading a few of the bad reviews.

. Elida, Maine

Be prepared to dig in. . If you have a smaller projector be prepared to do some minor surgery. The supplied head was too big for my small samsung hx300. First thing, make sure it fits your projector! . . I had to remove the 4 leg extensions and turn over the remaining legs to secure it to the projector. . Once it's mounted correctly it's solid and bullet proof. . Some things to look out for:. . The instructions don't tell you what size drill to use for the supplied lag bolt to drill into the stud. I used 3/16" and it worked perfectly. . The kit doesn't come with wall anchors for drywall, only for mounting to concrete. I used 14 1 1/2" from hd and used a 5/16" drill bit they worked perfectly. . The instructions are too small and tiny to be useful, what they do detail zoom isn't too useful. . I pretty much ended up winging this assembly but i knew i could make it work and once installed it's solid as a rock. I used the center hold into a stud and the two outer holes for wall anchors. It's not going anywhere.

T. Carolyn, Stoke-on-Trent says

I have the optoma hd66 and was a bit worried about getting this projector after seeing a few folks saying it didn't work. There was on reviewer whom had the hd66 and did manage to get the mount to work for them, so i was hopeful. Using the picture on the mentioned review, i was able to attach the mount to my projector, but i decided that this wasn't ideal. The mount was too far back, and should ideally be more centered between the brackets. Enter my solution. . I've attached a few pictures, which i hope help anyone else with this model, but the key is to actually reverse one of the longer mounting arms. If the kit came with 4 mini-arms, instead of just two, you wouldn't need to do this, hence the star deduction (in addition to the meh instructions on mounting to any projector). . The bottom line is this: this is a very versatile mount that will work for basically any projector. It includes multiple screws and washers to help you find the best solution for your projector. If you're comfortable with a screwdriver and socket wrench, you'll have no problems with this. In the end, while i made it fit the projector fine, and was able to build the rest of it, i couldn't actually mount this to my ceiling. Not the mount's fault turns out we just can't mount through our lathe plaster ceiling without professional help, which isn't worth it for a rental.

. Rose, New Mexico

I was expecting to pay a small fortune to find a projector mount for my vaulted ceiling. This was one of (if not the) least expensive projector mounts i've seen that works with a vaulted ceiling. The price is even amazing for a flat ceiling mount. . I wasn't expecting too much given the low price, but this mount does it all. It is extremely stable. I attempted to put my full weight on it by hanging from it (don't try that at home, kids) before trusting it with my projector. It held my weight with no problem at all, and i wouldn't be surprised if it could hold over 200 lbs. Not that there are many home-theater projectors even close to that weight, but it should give you an idea of just how strong this is. . Installation wasn't difficult. The instructions it came with weren't too good. Basically just an exploded view diagram of how the pieces go together. Since the mount is universal, that means you need to figure out how to connect it to your projector since there is no real standard for where projector manufacturers place the mounting hole screws. It took me several tries to get 3 of the 4 holes aligned on mine - which would have been sufficient, but it finally occurred to me that i could reverse one of the brackets to get all 4 screws in. I forget what i did exactly, since this was months ago, but just keep in mind that you will need to "macgyver" this thing a little bit. . Once the bracket and bar are attached to the ceiling, do a quick test by pulling it down with about 30 lbs of force to ensure the bracket is locked in there and that the parts were installed correctly. Mine slid a quarter of an inch before coming to rest - after that i couldn't budge it. Then slide the projector with the rest of the mounting assembly onto the bracket. . After the projector is placed on the bracket, it is just a matter of aligning everything with the projector on. It may take a few minutes to get perfect alignment since making minor adjustments on each axis requires slightly unscrewing, making an minor adjustment, then tightening a bolt. It might have been easier if it were a ball and socket adjustment to align everything at once with one bolt. However the alignment is something you only have to do once during installation, so it's not that bad. . One adjustment that is slightly hidden is the left/right adjustment. Many other reviewers complain about the lack of left/right adjustment, but it's there just a bit hidden. Refer to the product photos on online store, one of them shows where that adjustment is located. It only gives you +/- 5 degrees of adjustment so you do have to be slightly on target when you mount the main bolts to your ceiling, but it doesn't have to be absolutely perfect. . Using zip-ties for the cables (power, vga, hdmi, or whatever you're using) running along the post make the installation very tidy. There might be a way to route the cables inside of the post if you plan it out right, but i didn't bother. . The original projector is going to be replaced soon, i will update this review after trying the mount with the new projector. Most likely a different brand projector. . Overall, this is a great mount for a great price. I highly recommend it!

. Wanda, Niedersachsen says

I decided to give this a review and post pictures of how i configured the bracket to fit on an acer h7531d projector(picked one up from newegg for almost half off on black friday. Wooot-woot! ) acer h7531d dlp home theater projector (1080p). I like the fact that you can invert the brackets and move them to different locations to make it work for your projector. I haven't put it up yet as i'm waiting for the weekend to do that, but the upper part seems solid and the bracket that mounts to the projector feels solid after you tighten up the bolts once you have it configured/laid out. . I will not be using the extension pole, so i can't comment on how that will work, but it is pretty heavy gauge steel. The acer h7531d takes m3 screws, this kit comes with m3x8, so i will need to go pick up some longer m3 screws, the manual recommends m3x25, but probably won't need something that long, otherwise you'll need washer, which this kit comes with as well. . Take a look at the pix i uploaded to get a better idea of how it looks configured to match the holes and have it centered as possible.

I. Megan, Kentucky

Ok at first i would have given this thing only 1 or 2 stars because it is a bit of a hassle to set up. Mounting it to the projector wasent very difficult in my case but fine tunning the projector to the correct direction is a bit tricky and can take some time to get it just right. I am pretty particular and didnt like any skew in my picture so getting the adjustment just right (rotating left and right) was a bit of a headache. The two very little bolts on top for making this adjustment are hard to get to with the projector mounted. These two bolts alow the projector to be rotated and is a must to get a perfectly square picture. Once i did finally get everything set though it was all good, and i am not going to be moving it anymore now that it is set. So it does the job and it is much cheaper than most of the mounts i have seen. If you don't mind playing around with this for a couple of days to get it just right and don't plan on moving the projector once mounted then this is a good buy. It looks like it would work for just about any projector on the market. My projector is a benq ep5920 just incase anyone was wondering.

W. Rita, Lincolnshire says

This worked great for me. I see a lot of frustration on the mounting holes. I had a very small 3 hole pattern and thought it wouldn't work. But see if this helps you. . There is an extra hole between two of the sides. You remove the two arms around it, and move one of the arms over. Now, my first instinct was to spread the 3 out like a spider, but the hardware they give you, there are not enough short pieces to slip inside and make the holes line up. Disregard completely that even if you could get them to line up the bracket wouldn't be straight. . But here is what you do, and someone actually posted a customer picture on here of exactly how it should look. I'll link that in the end and see if it posts. But basically, you want to make a v with the two arms on the back, swing them towards the arm that is mounted in the center hole. The one in the center hole is then pointed forward or up in the middle of the v. The v portion grabs the two outer screw holes and the one in front points towards the front of your projector. . Took a minute to figure it out, and lots of stars have been docked for people saying they can't get it to work. This is a universal kit. The manufacture doesn't test all brands, and unlike tv wall mounts, there isn't really any industry standard sizing on projectors. This mount i bet will work for 99% of projects, you just have to figure out how to line it up. . I'm not going to dock a star for it, but the only other annoying thing about the mount is all the hardware. This has so many adjustments, angles, everything, i really like it a lot. But no hardware is preinstalled. They give you a back full of nuts and bolts and you get to put in a whole grip of them to mount it in the position you want and hold it there. . I did not use the extension bracket, i needed mine sucked up close to the ceiling. The bracket is very secure. I've got one of the lag bolts into a stud, and this isn't going anywhere. . I'm going to try and link the picture, sandy wilson posted it in jan 2011. Http://www. Online store. Com/gp/customer-media/product-gallery/b000idc0k2/ref cm cr dp cust img see all img0

C. Glenda, Tennessee

High quality kit. One can definitely mount any projector any way he wants to. It's full of adjustments. Good thing it comes with good instructions and every screw and nut you may need. I had one issue with my acer h5380bd though: the screws that attach the mount to the projector were a little too short, so i had to attach the mount to the leg holes, not the mounting holes. But that's because i'm lazy and i didn't want to go to a hardware store to buy slightly longer screws.

E. Veronica, Hackney says

It is busily danging a projector from my ceiling. I installed this thing about 6 months ago and then forgot it. That's a good thing because it means the mount has been doing its job and not giving me hassle. . There are lots of pieces and it's a good idea to follow the instructions. This is especially so for the bottom part that attaches to the projector. All the pieces i needed for hanging a projector off the ceiling were included. . There are lots of rotating and angling about adjustments that make it easy to aim the projector at whatever is being used as a screen. That said, you want to mount everything square anyway to avoid tombstoning the view. Sure, the projector can adjust for it but everything just works and looks better if the projector is square to the screen. . As for the quality of the mount itself. It is a fine hunk of metal. Mu ceiling joist will break before this this mount gives way.

. Dorine, Thurrock

This universal mounting is made for for a much larger and heavier projector so the legs can accommodate spacing much wider than needed for my optoma. Initially it seemed that it would be too large, i. E. , that i would not be able to adjust it small enough for the rather compact and light optoma (as most projectors are now these days). But by turning 2 of the sliding inserts around (not suggested in the manual-you have to use some ingenuity and common sense), it worked! it comes with 2 one-foot extensions for mounting considerably lower than the ceiling but it turned out i didn't need them and the 6" (15 cm) drop without any extension was just right for me. . Positives: it has every possible adjustment imaginable. You can fine-tune rotation on every possible axis and in addition, the mount is made for either horizontal ceilings or sloped ceilings up to 45-degrees. Every screw, washer and lug you need is included (including the m3 screws that most projectors use) and even allen wrenches for the bolts. You will, of course, need a screw-driver and drill. It can be installed by one person without assistance. . Negatives: the only negative is that the manual and accompanying diagram is really sloppily written, i mean some errors are just absurd. Washers and nuts that are clearly needed are missing from the diagram (but they are not missing from the shipment! ), the wrong screw numbers are shown in the diagrams, etc. , but with a little common sense you can figure out what they really meant, and anyone attempting to install this would generally have enough experience being handy with such things to figure it out. So i wouldn't let this keep me from buying it (but you'll be scratching your head trying to figure some of this out! ).

L. Beale, Nottinghamshire says

Outstanding price and value. Very versatile to put the projector up in different configurations. The mount to the projector is kind of odd, my projector had 3 screw points for a mount, but they were too close together to connect the 3-4 arms on the mount. I had to connect the mount to the screw holes made for the projector legs, which worked perfectly but i don't think it was supposed to work this way. It was literally the only way it could work though. . There's lots of small parts and it took at least 2 hrs to get everything perfect. It is however my first time putting one up. . Overall, for the price and features you cannot go wrong and for $25 you can't fault the unit. Happy with the purchase and i know you will be too. Feel free to thumbs back if this review helped.



Top lcddlp projector ceiling mount Review

Disadvantage and Critical reviews

D. Carolyn, South Dakota says

Mad complicated- when i opened the box, millions of pieces fell out. Maybe that's just the nature of a wall/ceiling mount but it was insane. I ended up hobbling together two separate mounts just to get it on the wall and even that barely works. If you buy it- be prepared for a complicated job, or buy (cuz it looks strong and legit) and have a professional install it. I wish i had.

A. Wimbish, Hackney

To put this review into context, this is the only projector ceiling mount i have ever worked with and am not returning it. This ceiling mount was the most frustrating part of putting together my home theater. The extension bar has some play in it and it is very difficult to keep it pointed directly at the screen we purchased. There is no fine control of the positioning once you have it pointed in the general direction of the screen. This makes positioning it for a permanent home theater system harder than it should be. . The other issue is that while the extension bar can get very large (almost twice its length), it can't get very small. Going from no extension bar to extension bar adds a substantial length. The projector hangs down much further than it needs to. . I wish i had researched more and spent a little more to get something that would have:. 1) allowed the projector to be as high as possible without causing a fire hazard based on the manufacturer's recommendations. 2) found a mount that had both course and fine control for aiming the projector at the screen.

I. Eleanor, Sutton says

Mount is solid enough but there a few issues that need to be addressed. I would have probably given the product 4 stars but if i have to go to the hardware store to buy something that should have been included then the review is adjusted accordingly. I know many people had issues with the instructions. I agree, they aren t great but i m fairly handy so it was not too difficult to put the unit together. The schematic on the directions leaves out some nylon washers on certain sides but common sense will get you through that omission. . My main issue came from mounting the unit to the projector. I am using an optomo gt 1080 so i figured it would fit no problem. The arm that connects to the projector has four claws that can be used to connect. The directions say that if your projector only has three (which the optomo has) mounting holes, just remove one of the claws and move the third to the middle position of the mounting plate. Problem is on the mounting plate i received in the kit there is no middle position. I see some pics on here that clearly show the middle hole on the mounting plate but mine doesn t have one. So, i need to drill it out. Not a huge deal but an added step. Then when i go to mount the claws to the projector there are no screws that fit the unit. The screw is a standard m3 which are used in all hardware builds so you would think it would be included. So, now i have to go to the hardware store and buy three screws in order to mount the unit. . I m hoping this mount works better than the out of box experience i ve encountered so far. Unit is solid enough but the necessity to break out the drill and go to the hardware store definitely detract from my satisfaction level.

. Linda, Champagne-Ardenne

Update after a few weeks - there's so much play that it occasionally needs adjustment even though it hasn't been touched at all. I'm hoping it "settles" over the next few months and doesn't need adjustment once every few days as it has over the last couple of weeks. Update after a year and a half - it has settled and is much better but still needs adjustment about once a month if you're super picky like i am. Please see original review below. . My main complaint is that this mount does not hold the projector firmly enough. I wanted to be able to press buttons and clean the lens without worry. Unfortunately, if you press a button or touch the projector in any way, be prepared for a small adjustment to re-aim your projector as even with all of the screws very securely tightened, there's still plenty of wiggle left. . My other complaint is that it does not play nicely with my epson 3010 projector. I needed to purchase 4 extension arms and then had to custom cut the hardened steel arms with a dremel cutting wheel to get the longer arms short enough to fit correctly. Not the end of the world but after spending an extra fifteen bucks on the extended arms i had hoped i wouldn't have needed to do any metal work. . Pros. Inexpensive. White (matches my projector and ceiling). Lots of adjustments available for aiming. Secure - i feel like i could hang from this if i wanted to. . Cons. Doesn't hold very firmly. Doesn't easily fit epson projectors

H. Veronica, Minnesota says

This does work, but it's far from quality. Admittedly it is much longer than my old ceiling mount but the quality is way off. Good luck getting it perfectly level. If you must hang from the ceiling, are cash strapped and have the patience to fiddle then this mount is an ok option. . Update . . Most of the wobble can be eliminated using thick stud plates perpendicular to the regular mounting. See my photo. You can buy them from the plumbing department of home depot; their real purpose is prevent drilling screws into water pipes. . Initially the picture had really bad keystoning. This is because most projectors have built in keystone correction which makes using upside even worse. This can be mitigated by tilting the projector upwards. An obvious solution but it took me a day to think of it + your projector will need a lens-shift function to re-position the picture. This five year old sanyo plv-z2000 has it, but it was a higher-end device when new. . The picture is now virtually perfect and the projector almost wobble-free. Knowing this stabilization solution i'd likely buy again but still think it deserves three stars because most buyers won't be as handy/creative. .

J. Beale, Wyoming

It holds my projector to the ceiling. That being said its universal nature means that there are a ton of bolts on this thing. Getting the adjustment correct requires immense patience. I have a screen door that slams sort of hard which means the infinitesimal vibrations radiating through my brick house shakes it out of adjustment. I discovered early on the best way to adjust it is to tighten everything down tight tight and force the movements. There is just no other way. There are no mechanisms in place for fine tuning. A few fine threaded jack screws could be added at the joints to facilitate fine tuning. I just haven't the motivation at this time to modify the device.

W. Lewis, Bedfordshire says

The instructions are nearly useless, so you should have a bit of a knack for this sort of thing in order to assemble it. That said, you are probably comfortable with this if you are buying it, and it's not super difficult (just a warning to anyone afraid of mechanical assembly). In the end i had to make 4-5 trips to the hardware store to get all the right bolts/nuts/washers/etc. I needed to make this truly universal, but that was partly my fault. For example, there was nothing provided to connect this mount to my projector - needed specific bolts/washers for that. I'm happy with the final assembly, and it seems fairly sturdy. My main complaint would probably be that there is not enough easy adjustment to make - i. E. , it should be easier to adjust and then tighten the projector. Also it seems overpriced for what you're getting, especially if you have to buy a lot of extra bolts like i did. Next time i would look for a mount for my specific projector first, but would be ok to buy this again if there wasn't one.

. Jarvis, Doncaster

Lower section does not lock in properly. The lower section came out and my projector hit the concrete floor 10 foot below destroying my projector. I suggest if you use this cheap mount that you drill a screw from lower mount to upper mount so it can not slide out and damage your projector as mine is trash!

Q. Bethany, Vermont says

If i had to do it over again, i'd just pay $40 instead of $16 and get one specifically made for my projector (acer h6510bd ) does it work? yes, it is holding my projector up, but it requires a ton of tweaking to get it level and keep it level. I believe it could've been designed a lot more simple and more reliable. If you're looking for something with great step-by-step directions, this is not it. I'm a pretty handy guy, and i'm good with hardware/building things, so i was able to make this work with modification. But if you're not, don't go this route, get one designed specifically for your projector. . Update: after a week, i have declared this a total loss, worst purchase i've ever made. Doesn't hold projector level at all. Impossible to get your projector level & keep it that way.

V. Olga, Cheshire

This is not a complete solution (does not include screws for attaching to projector itself) and takes a lot of time and effort to setup. The instructions are bad. The product itself is pretty ugly, the only consideration was function. If you have large ceiling drop it is probably a good solution. And if you don't mind fiddling with it to get it to work. For me, i should have just purchased the more expensive mount but i saw that people said this worked well with the optoma hd28dse and this was $35 cheaper. It may work but you have to spend a lot of time configuring the arms to match the mounting posts on the projector, and then take a trip to the hw store to get the m5 screws to attach it. And there might have been other issues but i stopped trying after realizing that it would take all of this time and that for a few more $ i could get the better / faster solution.

R. Noguera, Hamburg says

I'm sure this product works great for the majority of the users who buy it and there must be a reason why it is the number one seller in its category. But i just could not get it to work for me. As stated it is a universal mount, which means it should work for 90% of applications- but you have to figure out how to get it to work- the included instructions/drawings won't help. I was just not technically minded or patient enough to immediately figure it out and after several hours i had a hundred pieces of bolts and parts staring at me with my projector no closer to being mounted. . While it is nice that the manufacturer includes just about any nut/bolt/washer you would ever need, they don't mark or separate them out so this is even more you have to figure out before you can even begin. . Eventually i broke down and bought another mount that is supposed to be guaranteed to fit my projector (benq hc1200) without any tetris problem solving. If you like puzzles and are pretty good with tiny nuts and washers you may have better luck than me. I wanted to like this product as it seems solidly built, includes multiple height and play adjustments and even comes in two colors but it is just so darn frustrating to put together.

K. Rowe, Kansas

Did the job. Just. I'll make this quick. Instructions will give you a general idea, but are very unclear. For example, it tells you a screw needs to go on something, but its unclear if its going on the outside or the inside of the part. Way too many different sized screws and bolts to deal with. Instructions again are worthless at figuring out what screw is what, because they all look alike on the page. After an hour, i went with my own thing and didn't use even half of the screws that came with it. Works well for something this cheap.

Y. Wilson, Haringey says

Just ok. If your joists run perpendicular to your screen then you are in luck. Mine don't. I had to mount a small piece of hardwood to the ceiling first so i could secure the mount. It is bristtling with nuts and bolts everywhere so it is not the most attractive thing when mounted. Getting everything tight is a chore. It seems sturdy and will work but if there is a next time i will shop around a bit more. It is holding a benq using three of the four arms. I had to hacksaw one of the spare arms to make it work.

F. Kristen, West Virginia

This mount has parts to mount several types of projectors. It holds my epson projector well and the long arm was useful to get my projector lower than the ceiling fan that is located a couple feet in front of it. Assembling could be easier though. . My main problem with the mount is adjusting it. It is pretty hard to tilt the projector to the desired position and locking it there. Once you adjust, the weight of the projector will bring it a little bit down.

. Tracey, Tennessee says

Arrived broken. By the time we got around to installing it the return period expired. Our projector is a epson cinema home 2045. We tried to install it and flush mount it but the thing couldn t tilt. It would just swing back to the original position. It was obvious that it was not able to support the weight. We opted for the more expensive epson brand mount and couldn t be happier. Worth the extra money.

S. Rebecca, Manchester

Assembly instructions are not quite clear, and some pieces are very difficult to put together, especially after threading the cables through the shaft high up by the ceiling. Also, my hdmi cable is heavily shielded, and did not thread easily through the shaft. Getting my rg6 and power cord through were also tough. I'm happy with it now that it's up, but it would be better if the finished product was more rigid. Another complaint is that they provide 4 and 5mm bolts to attach the mount, but mine needed 6mm, so off to home depot. Off again to home depot for a second trip, as the lag screws they provide to thread into the ceiling joist are made of metal so soft a phillips head screwdriver will strip them. I got them most of the way in before they stripped, then had to use a pair of vice-grips to take them out. I got some stainless steel ones and installed them with a socket wrench. Overall a decent product for the price, but they shouldn't provide screws as soft as ju-ju-bees.

C. Jackson, Manitoba says

Really wanted this mount to work. On unpacking it seemed very sturdy and well made. When configuring in non-extension mount mode all the screw holes were correct, but i needed it for the extension where one of the holes (top wall mount to extension arm area) we not drilled correctly. Thus i can't use it. Really wanted it to work, but not going to take a chance on exchanging for another that is manufactured correctly.

E. Morgan, Surrey

I was hoping to use this mount to get my screen bigger than it was when installed with a straight mount on a flat ceiling. I mounted this right behind my cable outputs, but because of the angle of the projector bracket on the bottom, you really can't get more than a 4-6" additional from a backward diagonal. This also isn't the easiest thing to assemble as there are a ton of different configurations and parts. The installation guide is rather vague. I'm sure this would be much better on a vaulted ceiling.

. Campbell, Brent says

This is most definitely a case of you get what you pay for. If i'm not mistaken the product description claims that this mount is universal and suitable for both ceiling and wall mount application. Regardless, i would not recommend purchasing this product for a wall mount set up. It probably does okay from a ceiling and does have some redeeming adjustment qualities. However, the hardware seems a bit cheap and the mount is somewhat of an eyesore in a residential setting. I still managed to mount my benq w1070 to a wall but i had to go a little outside of the regular capabilities of the mount and rig something up. I mounted it on the wall and extended it to about 22". After the first day it had already settled and sagged a bit (even with stud mounted security) so i attached some light picture wire from above the mount on both sides with drywall anchors to reduce the burden of weight on the extended mount. It seems to be holding pretty well with the added support but i must admit that there was a bit more time and effort involved than i expected. I'm relatively happy with the set up now but i would probably recommend something specifically designed for wall mount purposes if that is your goal. This mount will likely do fine if you're going for the ceiling mount approach.

N. Theresa, Rhone-Alpes

It works, but that is about the only nice thing i can say. . Pros: it holds a projector, it has multiple expansion options to fit most projectors. Cons: the many adjustments also cause alignment issues. I can take the lens cover off and it causes the stupid thing to get out of alignment. You can easily tighten down some of the tilt screws, but the 360 degree rotation nuts are impossible to get to without buying a special small wrench. Even tightened down, the slightest touch can knock it out of alignment.

M. Valdez, Louisiana says

Nice design that fit my epson 730hd projector. Most would not fit my projector due to limited distance of mount arms. Bought two of these ceiling mounts. The option of the extended arm was great where i need to avoid a light fixture. A few gotchas is the screws. 1) the screws go into sheet metal and in my efforts to secure the projector so it would hold position, the one screw stripped the threads. Sheet metal is not enough for threads. This is my specific reason for giving it 3 instead of 4 stars. Despite this i still think it was still very much worth the money and in some other ways is a better mount that many other more expensive mounts that i looked at. 2) hard to adjust angle and then tighten screws to hold position. Screws are not easy to get at, so you end up seeing what position is close and tightening screws and seeing if you got it right and then loosening and doing it again. Once set it works fine. It should be a one time pain so i do not consider it much of a negative but given my first complaint i think it could use some thought about design. . The other minor ding i give to this is that when i mounted the projector, the instructions suggest running the cable through the extended arm. This was all backwards, the cable came out of the arm headed to the front of the projector and the arm is too tight of a space for feeding cables. I opted to instead purchase some cable mounts that i could position on the outside of the arm. Easier to manage that way instead of struggling with feeding them through the arm.

P. Rose, Utah

I wish i had opted for a higher-quality mount. It is versatile enough for my panasonic pt-ae900u, but the weight of it causes it to sag if it is touched when pressing buttons. The screws cannot be tightened much until the threads start to strip which is the main problem. If they used thicker or higher quality metals then this would be a great mount.

B. Carrie, Hartlepool says

This mount does not work with an acer 5360. The holes on the projector for the screws to attach the mount to the projector itself are too close together. You can play with this distance a little bit on this model by moving the legs in and out, but not enough to match up with the holes on the projector. I'm too lazy to return it so i ended up using it by taking a hacksaw to the pieces to get them to fit. But, obviously this isn't what you are looking for. If i had to do it over again i would buy one capable of fitting mounting holes that are close together or just buy this one:. . Projector-gear projector ceiling mount for acer h5360. . If it fits your projector then it's a good buy and really let's you fine tune all the angles, etc very easily.

. Guest, Aquitaine

You definitely get what you pay for with this one. It is small, ugly and cheap. It is pretty flimsy too, i used a small/light projector and it can barely hold it steady. Nevermind if i had a bigger projector. The assembly seems needlessly complicated, lots of small parts. The extension tube is needlessly long, it starts at around a foot long. Which means you can either mount the projector on the ceiling, or a minimum of an extra foot down. Nothing in between, unless you like cutting and re-drilling. The adjustments don't hold very well, you really have to try to crank down the screws to get it to hold tight. And then you end up stripping out the threads like i did. So you're basically screwed either way (see what i did there? ). At the end of the day, it's basically a waste of money and i will probably toss mine in the trash. Oh well, at least it was cheap.

Z. Walsh, Kensington and Chelsea says

This product does not have proper screws for the optoma hd26 1080p 3d dlp home theater projector. The screws in the package were too short when trying to attach the projector to it. That is a huge defect! i had to use screws from my garage to fit the bracket/projector. . Think about it. Ceiling mount is attached, but projector cannot be attached to it. What is the point

L. Lynette, Arkansas

Arrived today. Whew! what a task! i have a optima hd25e and i had to get real creative to make this work. Thousands of pieces. Instructions will give you a head ache. I just winged it and managed to get it "somewhat" right ( i hope it doesn't fall apart on me). The final swivel piece seems impossible to install with what was provided. I had to go to lowes to pick up a extra nut and screw to complete this. I'm proud that i stuck with it but if you lack patience and creativity, this is not for you if you have an optima 25e

T. Lara, Greenwich says

You get a free puzzle to put together when you order this. 100's of pieces in the box, and you only need 10 of them. Not recommended for a 3 prong projector. And it's not super stable either. I'm jamming paper in the crevice to get the projector to display at a low enough angle. Upgrade to the $50 job and save yourself some headaches.

U. Alba, Torbay

Not bad, pretty good for a really good price. I was not willing to pay for the high dollar mounts so this is the one i went with. It does the job, but it was pretty difficult to get it to work. I have a portable projector, so the bolt pattern was really small. The arms on this mount are long so i had to flip them. When mounting on the celling it was really hard to get the angle i needed. It was just tough to fine tune the projection angle. Took a while to get it up, but now that it is i do really like having a mount rather than leaving the projector on the table. Get what you pa for. Does work, but not easy to work with. Good thing is this is a set it and forget it product so now that it is up, i am happy with it.

O. Sandra, Middlesbrough says

This got the job done but for my specific projector, there were some issues. I bought this for an optoma hd27, for which there are only three mounting holes on the projector and they're all located very close together. This projector mount has four arms and instructions for how to remove one arm and move another to a "center" hole. My mount only had four holes and no center hole, so it was different than the instructions and therefore i had to angle it to fit my three-hole projector. . The second issue was with the optoma hd27, all three holes on the projector were very close together. I could see this mount working well for projectors with holes on each corner, but the optoma had holes about 3in apart. The extender arms on the mount were too big to fit the holes, so i had to cut through the metal to create smaller arms that would fit the projector holes and still lock into the mount. . Overall, this would likely work well for an older model projector, but it would not fit the hd27 out of the box and required two modifications.



Leave a Reply

You must be logged in to post a comment.


Back to Top

Related Products

  • Show Details
    Vivo Universal Adjustable Projection Mount Vp01w (Office Electronics)

    Vivo Universal Adjustable Projection Mount Vp01w (Office Electronics) 321

    Add to Basket Vivo Universal Adjustable Projection Mount Vp01w (Office Electronics), Universal Adjustable Ceiling Projector / Projection Mount Extending Arms Mounting Bracket Mount-vp01w Is A Brand New, Heavy Duty, All Steel, Universal Ceiling Projector Mount. Ideal For Any Home Or Office, This High Grade Steel Mount Is Weight Tested At 30lbs And Designed -Vivo Universal Adjustable White Ceiling Projector / Projection Mount Extending Arms Mounting Bracket Mount-vp01w
    1. Was easy to adjust for the projector. We struggled getting the bolts tight on the ceiling. It wasn't impossibly, just don't try it when your patience is running thin! it goes onto the project so simply that it seems like you must be doing something wrong when it takes to long to get things tight on ... go to https://vufes.com/vivo-universal-adjustable-projection-mount-vp01w-3211013qa86/#vivo-universal-adjustable-projection-mount-vp01w
    2. Addition: Solid Construction Made Entirely Of High Grade Steel, Supporting Projectors Up To 30 Lbs.
    3. Addition: Fully Adjustable With 15-degree Tilt, 15-degree Swivel, And 360-degree Rotation, Hitting All The Right Viewing Angles.
    Half Price Vivo Universal Adjustable Projection Mount Vp01w (Office Electronics) Lysb01013qa86 Electrncs
  • See Reviews
    Qualgear Qg-pm-002-wht Universal Projector Ceiling Mount, White (qg pm 002 wht)

    Qualgear Qg-pm-002-wht Universal Projector Ceiling Mount, White (qg pm 002 wht) 2121

    See Offers Qualgear Qg-pm-002-wht Universal Projector Ceiling Mount, White (qg pm 002 wht), Universal projector ceiling mount, product overview projector ceiling mount for mounting dlp/ lcd video projectors to ceiling. cold-rolled steel construction. almost zero vibrations compared to aluminum models. perfect -qualgear qg-pm-002-wht universal projector ceiling mount, whiteTop Rated Qualgear Qg-pm-002-wht Universal Projector Ceiling Mount, White (Audio Or Video) Qg Pm 002 Wht
  • Explore more
    Videosecu Projector Vaulted Adjustable Extension (pj2b)

    Videosecu Projector Vaulted Adjustable Extension (pj2b) 890

    Discover it Videosecu Projector Vaulted Adjustable Extension (pj2b), Lcd dlp projector vaulted ceiling mount bracket adjustable extension pole to 26.7 - the videosecu projector ceiling mount is attractive, strong and light weight. durable black finish comes the latest design in safety, flexibility and value for many of today's most -videosecu lcd dlp projector vaulted ceiling mount bracket adjustable extension pole to 26.7 - black pj2b 1c9Shopping Videosecu Projector Vaulted Adjustable Extension (Office Electronics) Pj2b
  • Get Price
    Vivo Universal Adjustable Projection Mount Vp01b (Ce Accessory)

    Vivo Universal Adjustable Projection Mount Vp01b (Ce Accessory) 2087

    Show Details Vivo Universal Adjustable Projection Mount Vp01b (Ce Accessory), Universal adjustable ceiling projector/projection mount extending arms mount-vp01b is a brand new, heavy duty, all steel, universal ceiling projector mount. ideal for any home or office, this high grade steel mount is weight tested at 30lbs and designed -vivo universal adjustable black ceiling projector/projection mount extending arms mount-vp01bLowest Price Vivo Universal Adjustable Projection Mount Vp01b (Ce Accessory) Lysb01014cd0o Electrncs

Product Image Gallery

Top-videosecu-projector-ceiling-bracket-pj2w-208600idc0k2-Content